"Bike" amp bench test results (initial batch 6 amps)
#62
Stinger SPX 700.4 (175W @ 2 ohm; 125W @ 4 ohm)
2 ohm: ~153Watt
4 ohm: ~77Watt
Since I'm not the OP, I'll provide my setup as well:
All measurements taken with a Fluke 193-204 oscilloscope with the bike running.
2017 Street Glide, running, 14.2-14.4 V-rms
Sony XAV-AX7000: 2.72 V-rms pre-amp (did a bench test of this as well: 96% volume, or 48/50, gives distortion-free signal with 1 kHz @ 0dB test tone)
Test tone: 1 kHz @ -5dB
2 ohm: ~153Watt
4 ohm: ~77Watt
Since I'm not the OP, I'll provide my setup as well:
All measurements taken with a Fluke 193-204 oscilloscope with the bike running.
2017 Street Glide, running, 14.2-14.4 V-rms
Sony XAV-AX7000: 2.72 V-rms pre-amp (did a bench test of this as well: 96% volume, or 48/50, gives distortion-free signal with 1 kHz @ 0dB test tone)
Test tone: 1 kHz @ -5dB
#63
Join Date: Aug 2014
Location: Lockport Illinois
Posts: 2,612
Likes: 0
Received 460 Likes
on
386 Posts
Stinger SPX 700.4 (175W @ 2 ohm; 125W @ 4 ohm)
2 ohm: ~153Watt
4 ohm: ~77Watt
Since I'm not the OP, I'll provide my setup as well:
All measurements taken with a Fluke 193-204 oscilloscope with the bike running.
2017 Street Glide, running, 14.2-14.4 V-rms
Sony XAV-AX7000: 2.72 V-rms pre-amp (did a bench test of this as well: 96% volume, or 48/50, gives distortion-free signal with 1 kHz @ 0dB test tone)
Test tone: 1 kHz @ -5dB
2 ohm: ~153Watt
4 ohm: ~77Watt
Since I'm not the OP, I'll provide my setup as well:
All measurements taken with a Fluke 193-204 oscilloscope with the bike running.
2017 Street Glide, running, 14.2-14.4 V-rms
Sony XAV-AX7000: 2.72 V-rms pre-amp (did a bench test of this as well: 96% volume, or 48/50, gives distortion-free signal with 1 kHz @ 0dB test tone)
Test tone: 1 kHz @ -5dB
#64
#66
Thread
Thread Starter
Forum
Replies
Last Post