Harley Davidson Forums
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page

Harley Davidson Forums (https://www.hdforums.com/forum/)
-   Audio Systems (https://www.hdforums.com/forum/audio-systems-153/)
-   -   JL 600/6v2, fairing install (https://www.hdforums.com/forum/audio-systems/1247688-jl-600-6v2-fairing-install.html)

prostreet124 08-09-2018 08:06 AM
JL 600/6v2, fairing install
 
What fairings have they successfully been installed in, I know it doesn't fit older RG.

InthewindMN 08-09-2018 08:19 AM
Fits in the batwing fairing. Both old and new Rushmore.

prostreet124 08-09-2018 09:33 AM
Any photos or help on where it fits best ? Wont fit my RG but have a few friends with batwings in need of power.

InthewindMN 08-09-2018 09:38 AM
Originally Posted by prostreet124 (Post 17581281)
Any photos or help on where it fits best ? Wont fit my RG but have a few friends with batwings in need of power.
14 SG with jm amp tray.
https://cimg7.ibsrv.net/gimg/www.hdf...3d506649f.jpeg

SBates08 08-09-2018 10:16 AM
1 Attachment(s)
2010 Ultra mounted on BaddAzz Bikes amp tray.
Attachment 595209

prostreet124 08-09-2018 10:23 AM
Originally Posted by SBates08 (Post 17581383)
2010 Ultra mounted on BaddAzz Bikes amp tray.
Attachment 595208
Won't let me use that link.

SBates08 08-09-2018 10:34 AM
Originally Posted by prostreet124
Won't let me use that link.
Supposed to be a pic not a link. Not sure what happened.

screaminyz 08-09-2018 01:49 PM
Picture looks fine on my end, does anyone know of a amp tray that will work with the Alloy Art fairing braces? Something that will hold a JL 600x6 if possible.

FLYINGBROKE 08-09-2018 01:54 PM
Inthewind any more pictures ? I have that amp in same bike same tray.I don't know how you got it slid that far back is rear of amp on top of little lip on jm mount and then used spacer in front or did you cut rear lip out and not bolt tray to gauges .front of my 600 leaves samll dents in dynamat.

MMXIWG 08-09-2018 02:00 PM
Originally Posted by FLYINGBROKE (Post 17581944)
Inthewind any more pictures ? I have that amp in same bike same tray.I don't know how you got it slid that far back is rear of amp on top of little lip on jm mount and then used spacer in front or did you cut rear lip out and not bolt tray to gauges .front of my 600 leaves samll dents in dynamat.
It may be propped up on the lip and at an angle. I was able to do that with my SS TN4.900D and used a couple of layers of industrial Velcro to hold it in place. Leaves a couple of dents in my Dynamat as well.


All times are GMT -5. The time now is 11:16 AM.
Page 1 of 3
1
2
3
Show 40 post(s) from this thread on one page


© 2024 MH Sub I, LLC dba Internet Brands