|
Winter Builds! Completed or in progress. PICS!!
With winter and snow on the ground for us Northerners, this is our time to get upgrades and changes made so we can enjoy our bikes during the summer.
Please post pics ask questions and maybe you can or will get others inspired or get inspired yourself to do some changes. POST PICS!! I have changed to a painted inner fairing. I cut out the clutch side cubby hole for a DSP or Micro amp. https://cimg7.ibsrv.net/gimg/www.hdf...9679a66cfb.jpg https://cimg8.ibsrv.net/gimg/www.hdf...2ce6fc3cb0.jpg https://cimg5.ibsrv.net/gimg/www.hdf...ab9e327843.jpg https://cimg7.ibsrv.net/gimg/www.hdf...e3d1d1e136.jpg https://cimg9.ibsrv.net/gimg/www.hdf...9dbcd7f291.jpg https://cimg6.ibsrv.net/gimg/www.hdf...aaf6adbb12.jpg https://cimg2.ibsrv.net/gimg/www.hdf...56da658138.jpg |
I can't yet..... I'm waiting on a guy in the north to clue me in on some info. Lol
|
Originally Posted by Dsm Limited
(Post 17980804)
I can't yet..... I'm waiting on a guy in the north to clue me in on some info. Lol
I should have my last amp this weekend and put everything together. Hit me up!! Juice |
Juice is that where the CB circle used to be?
|
Originally Posted by marshallb
(Post 17980837)
Juice is that where the CB circle used to be?
Yes, I snipped the circle off previously and had to take a pic of my buddies bike to show the difference. The newer bikes lost the circle but kept the small ledge in the pic. I just cut it off with cutoff wheel, sanded and painted it. Juice |
I opened up the cb hole also by trimming the ring and shaving the webbing off the side of the pod. A GZ micro and psm fit there nicely. My main project has been modifying my lowers to fit a 8” speaker. Almost done with that. https://cimg2.ibsrv.net/gimg/www.hdf...b5a572b8d.jpeg https://cimg3.ibsrv.net/gimg/www.hdf...ee2e0a429.jpeg https://cimg0.ibsrv.net/gimg/www.hdf...0439ab70d.jpeg https://cimg1.ibsrv.net/gimg/www.hdf...52227bd6d.jpeg |
Originally Posted by InthewindMN
(Post 17981068)
I opened up the cb hole also by trimming the ring and shaving the webbing off the side of the pod. A GZ micro and psm fit there nicely. My main project has been modifying my lowers to fit a 8” speaker. Almost done with that. https://cimg1.ibsrv.net/gimg/www.hdf...52227bd6d.jpeg I like the lowers and that fairing pod mod does give some more room, I just don't want to give up my brackets yet. But, I will know more for sure once I have that SD 1200.4 in the fairing and button the brackets with the 6CX200Nd and make sure the fairing closes. I have a video of them dropping in pods and the preliminary fitment seemed to fit and the fairing closed up fine but, I did not have my amp tray in the fairing for that. I think that is what DSM is waiting on. Juice |
Originally Posted by Juice
Look good ITW,
I like the lowers and that fairing pod mod does give some more room, I just don't want to give up my brackets yet. But, I will know more for sure once I have that SD 1200.4 in the fairing and button the brackets with the 6CX250Nd and make sure the fairing closes. I have a video of them dropping in pods and the preliminary fitment seemed to fit and the fairing closed up fine but, I did not have my amp tray in the fairing for that. I think that is what DSM is waiting on. Juice |
Originally Posted by marshallb
(Post 17981101)
So you successfully put the Beymas in the pods on a Rushmore batwing?
This is not me, but they do fit in the pod. I am sure there was some mods in the pod itself. Juice |
Tour pack pods have been modded to fit a bigger/deeper magnet. I also had the rear controls removed.
Juice |
| All times are GMT -5. The time now is 09:04 PM. |
© 2024 MH Sub I, LLC dba Internet Brands