I posted earlier with what I thought was the part numbers for the original amp bracket bolts. Lost/threw mine away, and need them again for the JM bracket. I don't have a problem buying them from a dealer, or home Depot, I just need them to wrap this up. Can someone please verify the part numbers for me for the 4 bolts into the bracket/pods, I know these are Allen heads, and the two that attach in the back by the gauges. Of you happen to know bolt sizes I'll take that too.

http://partsfinder.onlinemicrofiche....0INNER%20-%201

 

1/4-20x1/2"

 

Thank you sir. Is that for all 6 of the upper bolts?

 

Yes it is. I wouldn't buy allen heads though, no sense in making it more difficult to bolt together.

 

Best tool ever for taking the radio out https://www.globalindustrial.com/p/t...ower-bit-10810

 

Yes they are...I have a set of those in metric and standard.

 

x 100 !!!

 

I already have those. They were huge in taking those lower bolts out of the pods. I think I'll stick with Phillips heads this time.

 

I only installed one of those lower three. They're not going anywhere.

 

So while I have you guys, how would one go about mounting an amp behind the headlight... vertically, bolted to the main tray?