Dayton DSP
#1
Dayton DSP
Trying to get my DSP to work. The light is on saying its getting power. I have the RCA's from the HU to the input on the DSP and RCA's from the output on the DSP to the amp. If i put the RCA's to the amp from the HU I get sound but no sound when I plug them in to the DSP. I'm totally confused
#3
I bet I need to click on the "mixer" button and turn all the inputs to 100% I'll try that tomorrow. I've given up for the nigh. Too many beers trying to figure this out.
The following users liked this post:
Bluesman280 (07-17-2019)
#6
I replaced the RCA's and could still only get one speaker to play at any kind of volume. I moved speaker wires and RCA's all around and nothing worked. Then the amp died. I think it has died. Looks like I need a new amp. Not going to get in a hurry to replace it. Unless I stumble across a great price on a 4 channel amp. This is my old 1988 Ultra. Going to focus on getting the fairing and rest of the system figured out for my 09 RK.
Thread
Thread Starter
Forum
Replies
Last Post