Lost my clutch after removing primary... PLEASE HELP!!
#1
Lost my clutch after removing primary... PLEASE HELP!!
Hey guys, so I removed my primary and inner primary covers along with the compensating sprocket and main shaft clutch pack to replace seals, stator etc... after reinstalling everything I have absolutely no clutch! I've adjusted at the cable, at the clutch pack and absolutely nothing...
The only thing I can think of is I believe I shifted the bike while everything was disassembled, and I had that little rod that goes through the clutch to the transmission removed at the time. Is it possible something got misaligned or?
Im at my wits end, please help!!!!
P.S. Its a 2007 dyna with mid controls, any questions or suggestions would be really really appreciated!!
The only thing I can think of is I believe I shifted the bike while everything was disassembled, and I had that little rod that goes through the clutch to the transmission removed at the time. Is it possible something got misaligned or?
Im at my wits end, please help!!!!
P.S. Its a 2007 dyna with mid controls, any questions or suggestions would be really really appreciated!!
#2
Join Date: Oct 2015
Location: Pine Flat Dam/South Bay Area, CA
Posts: 11,503
Received 19,624 Likes
on
6,663 Posts
The following users liked this post:
Chappull (04-24-2016)
#3
Join Date: Dec 2010
Location: Coromandel Peninsula New Zealand
Posts: 6,986
Received 447 Likes
on
255 Posts
The following users liked this post:
Chappull (04-24-2016)
#6
Thread
Thread Starter
Forum
Replies
Last Post
Chappull
Primary/Transmission/Driveline/Clutch
3
04-24-2016 03:16 PM