Originally Posted by SixDD
(Post 18341183)
Harder to keep the front end on that thing down than to make it wheelie.
|
I understand that it works for sport bikes, had a few myself.. that's not the question. On a harley it just looks badass....
|
Originally Posted by F86
Ditto with my Speed Triple... But I NEVER intend to raise the wheel. But it does happen under hard acceleration sometimes. Short wheelbase, high center of gravity, relatively torquey...
How many here knew there actually is, a Wheelie University? Yes, there really is. Now, if you want to work on "wheelies/jumps & slides" there's a school for that too, at www.motoventures.com Look for "WJ&S" classes. |
FYI |
Keep in mind that if you don't put it down gently you'll eventually break the front engine mount casting too.
|
^For that reason I'd recommend picking up something like this:
https://trackerdie.com/products/dyna-case-saver I have one of the "original landing pads" on my FXDL, wouldn't mind grabbing one of these for my FXDXT. Wouldn't consider this a fail safe by any means but it certainly reduces the odds of breaking your case mounts. *Note - not affiliated with the above company, just think it's a cool product... |
Originally Posted by DynaKid94
(Post 18361103)
^For that reason I'd recommend picking up something like this:
https://trackerdie.com/products/dyna-case-saver I have one of the "original landing pads" on my FXDL, wouldn't mind grabbing one of these for my FXDXT. Wouldn't consider this a fail safe by any means but it certainly reduces the odds of breaking your case mounts. *Note - not affiliated with the above company, just think it's a cool product... Good for some oneupmanship when it comes to claiming you have every accessory imaginable on your bike too. |
Originally Posted by DynaKid94
(Post 18361103)
^For that reason I'd recommend picking up something like this:
https://trackerdie.com/products/dyna-case-saver I have one of the "original landing pads" on my FXDL, wouldn't mind grabbing one of these for my FXDXT. Wouldn't consider this a fail safe by any means but it certainly reduces the odds of breaking your case mounts. *Note - not affiliated with the above company, just think it's a cool product... |
Hey that’s me! If you have any questions I’ll help as much as I can man. I’m still in the process of setting mine up. All I’ve done is exhaust, intake, front motor mount, case saver, cage, legend suspension in the rear, clutch lever, and risers and bars. |
To each their own...but I never understood the thought process of doing stunts on a Harley.....you guys must have a lot of money or the bikes are just cheaper where your at...cause to me they are to dam expensive to abuse....and what you have to put into them to get them there....
|
All times are GMT -5. The time now is 11:18 AM. |
© 2024 MH Sub I, LLC dba Internet Brands