Tunning questions???
Thread Starter
|
Cruiser
Joined: Jun 2008
Posts: 242
Likes: 1
From: Lexington SC
Tunning questions???
I am trying to get some basic info on tunning on my 06 st bob, I purchased the bike with 2000 miles on it 3 months ago (now have 5500 on it) the bike has vance and pipes, not sure wich ones, they are straggered slip-ons with baffels and the air filter is a paper elemet under the foot ball cover with no restrictions, the bike also has the PCIII usb on it with O2 bye pass. I finally got a laptop and d/L software for the bike last night found that the TPS was not set to Zero at idle and the map said it was for a 2004 softtail/dyna (little confused by this) the bike runs good I THINK (no prier harley to compare to) but the plugs are very white and stock heat range I think. But every so often the bike will cut off when coming to stop with clutch pulled in. (hoping fixing the tps adjust fixes that) looking at the map everything shows below the mid line exept for one spike at 2500rpm. I can not seam to find a map that matches my set up, i want low and mid rang power. any sugestions would be great.
Thanks Chris
Thanks Chris
if you plugs are white due to running hot and lean mixture, your going to have to fatten it up a bit... i have only used can maps on Power companders, those where on rockets... i have a SERT so i can adjust my tables individually... not sure how yours works but but i am sure someone does...
Thread
Thread Starter
Forum
Replies
Last Post
