S&S crate 111" motor. 585 easy start G cams. Fully stock from S&S.
Running a Ness AC backing plate, HD K&N air filter, and a busted old, nearly pinched Thunderheader. Tuned by Bob @ RC Cycles. Thanks Bob.

https://cimg2.ibsrv.net/gimg/www.hdf...786948ffcc.jpg

nice one

My 09 fat bob dyna sheet

https://cimg9.ibsrv.net/gimg/www.hdf...1b35ac8d69.jpg

Hey fattybob, nice build and results!:icon_cool:

Any clutch upgrades with that power?

Stock clutch with SE heavy clutch spring

'13 fxdf 103
 

'13 fxdf 103,s&s stealth a/c , v&h big shots, s&s 583 easy start, s&s gear driven cam conv.
Dyno'd at dynojet hq U.K.
https://cimg5.ibsrv.net/gimg/www.hdf...8c830f3803.jpg

14 Fat Bob, DK Customs AC, V&H 3" Slip-ons and NightRider FL-Vieds set to 65%https://cimg1.ibsrv.net/gimg/www.hdf...bf41f2d405.jpg

A modest increase for not much money. V&H FP3 installed since last time on the dyno

Hey guys !

Ok, it has been a long time since I've post something. I did some little mod to my 2009 Rocker C. Nothing to the engine though.

I got Roland Sands air intake, V&H big radius 2-into-2.

I've been to New Liskeard, ON recently and was impressed by this trailer, which has a dyno inside... It didn't took long that I went and enlist my bike for a test.
1st to know if the mod made changed something (lean/rich?).
2nd how many HP to the wheel the bike does.

Ended up that the bike is running prefectly neither rich or lean. And I got it on video.

Here's the sheet and the link for the video.

https://cimg4.ibsrv.net/gimg/www.hdf...974ba3f3eb.jpg



Take care.

Well ... After looking at your past posts, you guys's bike are all beast!

I think I have the lowest HP so far. :)
Soon or later I'll start looking for the options available, since I don't know much in which part (cams, pushing rod, etc.?) to change, I'll check threads on this forums first.

S&S - Worked heads, ported, valves & springs
S&S 585 cams
SE 10.5:1 pistons
SE Roller Rockers
SE Tappets
SE Cam plate and oil pump
SE Push rods
SE Variable clutch
SE 58MM throttle body and manifold
SE Fuel Injectors
SE Heavy Breather
D&D Exhaust
I think that's it.....


https://cimg0.ibsrv.net/gimg/www.hdf...5151482670.jpg