Battery tender
#11
Run wires directly to the battery (use Loc-Tite). To make a quick connect / disconnect you can solder wires to a banana jack and mount it some where out of sight. Use an additional banana jack on the Battery Tender leads. http://shop3.frys.com/product/237909...H:MAIN_RSLT_PG
Last edited by WS6 Formula; 02-15-2010 at 05:47 PM. Reason: Added link
#12
BatteryTender
I would remove the seat first to make sure the dealer or previous owner hasn't already intstalled the pig tail for the battery tender. I went through the pain of removing the battery only to discover the pig tail fished through the left side of the bike! Much easier getting seat back on!
#13
Join Date: Jan 2007
Location: along the shore of Mishigami
Posts: 15,674
Received 4,282 Likes
on
2,349 Posts
First thing I would do is take a long hard look around the battery side of the bike for a little two wire plug with a cover plug inserted, it could be on the left side, just look around. Or just take a ride up to the dealer maybe your salesman or service dept can show you where it might be.
#14
Thread
Thread Starter
Forum
Replies
Last Post
Clash City Rocker
General Harley Davidson Chat
7
03-04-2014 08:02 PM