Fuel Cross Over Line
I had to cut mine to send my tins out for paint. Can somebody tell me the size of the fuel line and where to get a new one and the clamps also....
Thanks Yes I used the search function. |
1/4". any auto parts store should have it. i also used a qiuck disconnect. it shuts off both sides of the line so no gas will leak out if you ever want to pull the tank again.http://www.cyclepages.com/ProductGro...roupID=4001262
|
... and use the 'pinch' spring clamps.... not any type of screw clamp. Reason is that the spring clamps will always be pinching. The 'adjustable' clamps tighten down, but will lose their ability over time because of hose under them.
|
Originally Posted by dpriest
(Post 4671599)
1/4". any auto parts store should have it. i also used a qiuck disconnect. it shuts off both sides of the line so no gas will leak out if you ever want to pull the tank again.http://www.cyclepages.com/ProductGro...roupID=4001262
Thanks, CB |
I bought the clamps from the dealer. I figured it was easier than trying to chase them down elsewhere.
|
I bought the clamps from the dealer, and the crimp tool from my Snap on tool guy. But ended up using small automotive fuel injection clamps from my local jobber ( because the crimp tool hadnt come in at the time ) . They are much stronger than any of the standard hose clamps ,work the balls, look great ,and are the perfect size.
|
Originally Posted by dpriest 1/4". any auto parts store should have it. i also used a qiuck disconnect. it shuts off both sides of the line so no gas will leak out if you ever want to pull the tank again.http://www.cyclepages.com/ProductGro...roupID=4001262
Originally Posted by cbz1200n
(Post 4672195)
I am curious about the quick connect you used, but the link does not work? Do you have pic and P/Ns
Thanks, CB I was trying to come up with an idea on how to do that and these are what I was loking for. Thanks, CB |
Originally Posted by dpriest
(Post 4671599)
1/4". any auto parts store should have it. i also used a qiuck disconnect. it shuts off both sides of the line so no gas will leak out if you ever want to pull the tank again.http://www.cyclepages.com/ProductGro...roupID=4001262
|
I have and can get these pinch clamps anytime ill see if i can find the supplier ..
We use them, at work so i just bring them home .. |
That would be great if I could get a few of those clamps!!!!
|
All times are GMT -5. The time now is 04:11 PM. |
© 2024 MH Sub I, LLC dba Internet Brands