Does anyone have a good map to a Street Bob 2006 with the SE II slip on and SE A/C, no other engine mods.

On Dynojets website there are no maps for -06 with SE II exhaust, now running a map for Dyna 2004 that apply in general, but not quite there.
Not running as good as I want on low rpm.

Emailed support at Dynojet that I read alot about how good the support is and that they will get you the map you need.
Was a little surprised when the only answer I got was to contact my Swedish agent. That is MotoSpeed​ here in Sweden​.
Have e-mailed them but suspect that the answer is "you have not bought your PC III here, so we can not help you." I'll see.

So I would be very grateful if anyone has a working map that I can "borrow".

Thanks

 

I've installed a PCIII and finally had to have my 2006 dyno tuned. Mods included SEII, removable baffle type, Big City Thunder baffles, HD Stage 1 upgrade, and stock other than that. Really, really, made a difference. My dyno sheet is somewhere in the searches. I need to download the map anyway and maybe I will send it, but here's the deal:

Both cylinders were tuned individually at a reputable wrench. He installed Amsoil synthetics and replaced my Screaming Eagle plugs back to stock. My bike now screams without any decel pop. Give me a few days, I've got a lot going on.

 

Yeah, I can se some dynotime in the future, but I would appreciate a good map to start with.

Thanks

 

A good tuner and a couple of hours on the dyno is a dollar well spent. It'll amaze you at how much it will help.