Front signal relocation mounts for ‘09 Dyna?
#1
Front signal relocation mounts for ‘09 Dyna?
I picked up some Drag mounts to move my front signals from the bars to the lower tree, I found the part number in another thread on here somewhere but they don’t fit.
The profile of the tree is pretty different to the mounts, as in this pic:
Does anyone know which mounts I need to fit these trees?
Thanks!
The profile of the tree is pretty different to the mounts, as in this pic:
Does anyone know which mounts I need to fit these trees?
Thanks!
#2
I think for 49mm fork tubes you need #69433-08A. Unfortunately there is huge difference in cost between what you have now though.
Link for picture only - Harley-Davidson® Front Turn Signal Relocation Kit | 69433-08A (plymouthharley-davidson.co.uk)
Link for picture only - Harley-Davidson® Front Turn Signal Relocation Kit | 69433-08A (plymouthharley-davidson.co.uk)
#3
#4
The piece pictured is only a small bracket to mount your signal to. You’re saying it won’t fit but I’m not sure what you mean by that.
The signal bolts to the bracket and the bracket will bolt to your triple tree. Am I not seeing something here?? If you have the hardware I do not see any issues.
The signal bolts to the bracket and the bracket will bolt to your triple tree. Am I not seeing something here?? If you have the hardware I do not see any issues.
#5
It’s just the wrong shape on the inner edge (that is supposed to fit flush with the tree). I had some on my ‘93 and the curve of the bracket was identical to the profile of the trees so it fitted flush.
These aren’t even close to flush, especially around where the pinch bolt goes through.
These aren’t even close to flush, especially around where the pinch bolt goes through.
Thread
Thread Starter
Forum
Replies
Last Post
10HDFXD
Dyna Parts
5
07-13-2011 03:49 PM