My red security key light came on this morning while I was coasting down a hill at around 10 mph. It was early in the morning so the bike was not running but the key was in the ignition and the run switch was on. I was trying to stay quiet for the neighbors and this is the thanks I get! I looked at the fault codes and I came up with B1155. I also saw PN 68921-07 but I don't know what that is for. Another thing to mention is that I do not have the slarm system or the remote FOB starting system. Any help to get my bike running would be greatly appreciated!

 

What year and model?

 

You have an 09 and you dont need the FOB? Please enlighten me....

And the B1155 is neutral light shorted to batt. Coasting the bike over 10mph (Ign on) will throw this one.

 

Its an 09 street bob

 

All my bike came with was two keys when I bought it from the dealer.

So what is the DIY fix on this? I tried the reset that I read in the manual of alternating the ignition from off to on three times but it didn't work. I'm stationed in germany and the closest dealer is over 2 hours away. Thanks

 

Missed this part...the bike didn't come with the remote FOB, just two keys.

 

Wow 09 no alarm, I have an 09 with the alarm,
This is interesting, maybe disconnect the battery for a bit could reset it.

 

I get that a lot. Makes me laugh. I have an '11 and I don't need nor have the fob. No alarm. It's an option, not standard. My bike didn't have that option when it was on the showroom floor, and I wanted to ride it home the minute I saw it.

So, just to be clear, not all new bikes come with the security and the fob.

 

The second code you mentioned looks more like a part # then a code.

 

x2 on disconnecting the battery