When draining and filling on both of these, does the service manual say as far as if it should be level or on the stand? Thanks for the help.

Would also be interested in what guys are using for oil in the primary and Trans, brand and weight.

Cheers.

 

On the stand. I'm using HD primary oil and amsoil in tranny.

 

Ok good to know on the stand for both.

Anyone have a service manual that says what amount goes in the Tran, and primary?

I've ran into a few guys that are using this (20W-50) in their engine, trans, and primary. Thoughts?

http://www.canadiantire.ca/AST/brows....jsp?locale=en

 

26 oz in primary, 32 oz in trans. I went with a gear oil in the trans, 75-90 Royal Purple and Trick Shift ATF in the Primary.

 

A quart each.

No thoughts... (rolleyes)

 

So a 90 gear oil will work in Trans? Something like this work? Or is it specific motorcycle gear oil?

http://www.canadiantire.ca/AST/brows....jsp?locale=en

 

this is the stuff I used. I think, either 90 or 140. http://www.amazon.com/Royal-Purple-7.../dp/B000J15THO.

if you put a qt in the primary you will have trouble finding nuetral... ask me how I know?

 

I use ATF type F in the primary and Mobil 1 gear oil in the gearbox.

I have aways put a litre in the primary which is 1.056 US quart and never had any trouble?

 

+1 on the ATF....I use Valvoline, 1 qt and I have no problem finding nuetral

 

on the stand, qt of Amsoil sever gear in trans, and qt of amsoil 20/50 in primary