What to do ???
Thread Starter
|
Road Master
Joined: Aug 2005
Posts: 1,203
Likes: 7
From: Bedford , Pa
What to do ???
I am only 5'6" with 29" inseam and was in a wreck few years back and my right leg is now 1"shorter than the left. My Lowrider I just got has forwards and reaching the peg on the brake side is hard while cruising . I have found three thing I can do but don't know which way to go. 1st reduced reach kit for the forwards $150 2nd heal rest from DK for $79 and 3rd some 4" x 8" floorboards that mount into the male clevis. Any opinions from you guys that might have used any of the above. Thanks Clap
short leg
Grand HDF Member
Joined: Mar 2010
Posts: 3,949
Likes: 150
From: South of Mordor
You could try these.
They move the forward controls 1-3/8″ back and 1″ up.
http://www.jpcycles.com/product/540-0266
They move the forward controls 1-3/8″ back and 1″ up.
http://www.jpcycles.com/product/540-0266
Seasoned HDF Member
Joined: Sep 2009
Posts: 25,307
Likes: 2,443
From: Eastern NE
Might not be a 100% fix, but they make special shoes for your situation, to even your length difference. Probably wouldn't work for a shifter side, due to shoe thickness. Your issue is on brake side so shoe sole thickness wouldn't be an issue. Worth a look...maybe...??
Intermediate
Joined: May 2012
Posts: 36
Likes: 5
From: Killeen, TX
Foot Boards
I am the same height and inseam as you, and the absolute best thing I have done is put the Dyna Switchback footboards on my 2002 Superglide. I could not possibly be happier. My feet are planted, solid, and comfortable on the boards. Just a thought for you.
Thread
Thread Starter
Forum
Replies
Last Post
..but Ill try 2 try
Dyna Glide Models
1
Mar 31, 2006 02:30 PM
