Hey everyone,

So my inner primary bearing is on its way out (at 8,200 mi) and I bought an All ***** inner primary bearing seal kit. Amazon told me it fit my 2006 Street Bob two separate times but I just received the package and it says:

Inner Primary Mainshaft Bearing and Seal Kit. Big Twin Models 1989-06 (except 06 Dyna)

Will this not work to change out my inner primary bearing? I'm annoyed because the part number (25-3101) on other sites says it will fit but the package is now saying it won't? I emailed All ***** but no response yet.

Where have you guys bought your inner primary bearing kit or has anyone used this same kit on an 06 and did it work?

Please let me know!

Thanks!

 

Here's the link:

 

And the bikes it's supposed to fit:

For Hi-Performance engines and bikes converted to open primary belt drive
Fits Big Twin with 5-speed transmission
Includes: (1) 25.025 bore double row angular contact bearing, (1) snap ring and (1) inner primary seal


This Item Fits the Following Applications:
2007 Harley Davidson FXDB Street Bob
2007 Harley Davidson FLHRC Road King Classic
2006-2007 Harley Davidson FLHX Street Glide
2006 Harley Davidson FXDI35 Dyna 35th Anniversary Super Glide
2006 Harley Davidson FXDBI Street Bob
2006 Harley Davidson FLSTI Heritage Softail
2006 Harley Davidson FLHXI Street Glide
2005-2007 Harley Davidson FLSTSC Softail Springer Classic
2005-2007 Harley Davidson FLSTN Softail Deluxe
2005-2006 Harley Davidson FXDCI Super Glide Custom
2005-2006 Harley Davidson FLSTSCI Softail Springer Classic
2005-2006 Harley Davidson FLSTNI Softail Deluxe
2004-2007 Harley Davidson FLHRS Road King Custom
2004-2006 Harley Davidson FXDWGI Dyna Wide Glide
2004-2006 Harley Davidson FXDLI Dyna Low Rider
2004-2006 Harley Davidson FXDI Dyna Super Glide
2004-2006 Harley Davidson FLHRSI Road King Custom
2004-2005 Harley Davidson FXDXI Dyna Super Glide Sport
2003-2006 Harley Davidson FLHTI Electra Glide Standard
2002 Harley Davidson FXDWG3
2001-2006 Harley Davidson FXSTSI Springer Softail
2001-2006 Harley Davidson FXSTI Softail Standard
2001-2006 Harley Davidson FXSTDI Softail Deuce
2001-2006 Harley Davidson FXSTBI Night Train
2001-2006 Harley Davidson FLSTFI Fat Boy
2001-2006 Harley Davidson FLSTCI Heritage Softail Classic
2001-2003 Harley Davidson FXDXT Dyna Super Glide T-Sport
2001-2003 Harley Davidson FLSTSI Heritage Springer
2001 Harley Davidson FXDWG2
2000-2007 Harley Davidson FXSTD Softail Deuce
2000 Harley Davidson FXR4
1999-2007 Harley Davidson FXSTB Night Train
1999-2005 Harley Davidson FXDX Dyna Super Glide Sport
1999 Harley Davidson FXR3

 

Just got an email back from All ***** actually.

The part number you need for 6 speed transmissions is 25-3103. Stupid Amazon. They sold me 25-3101 and told me it would fit.

Hope this helps someone else out. Buy 25-3103 and you'll be good.

 

I'm so confused though. All ***** is telling me 25-3103 will work while Dennis Kirk and Amazon is telling me it won't. Amazon says 25-3101 will work while All ***** and Dennis Kirk are telling me it won't.

I think I might just keep 25-3103 and 25-3101 on hand for when I tear down and hope one of them is right. Otherwise I guess I'll have to contact Harley.

Anyone use either kit on their 06 Dyna Street Bob?

 

get the baker 1 piece bearing and be done with it

 

Is that from harley? I'm going there now and for $23 i can get everything

 

Here you go:

http://bakerdrivetrain.com/high-torque-bearing-kit

and while you're at it get one of these too or you may end up destroying the new bearing.

http://bakerdrivetrain.com/attitude-chain-adjuster

 

Pick up Baker 189-56
You can buy it on Amazon or Ebay.
Its a sealed bearing.
You can cut off the race on your tranny input shaft with a dremel tool. Took me 2 minutes to cut it off. Press out the original open bearing, press in the Baker. Put your bike back together and stop worrying about your IPB for at least 40,000 miles. Probably much more.

The All ***** Bearing is marginally better than the stock 06 Harley bearing and if you don't have the 2 missing alignment dowels in your tranny case and inner primary you will be doing the job again. There is about a 95% chance that you don't have these dowels or provisions to mount them in the tranny housing.

 

Or you can get the Hayden primary chain tensioner part # M6 BT07

Totally automatic. None racheting. All spring loaded shoe.

Both tensioners get great reviews. I went with the Baker bearing and the Hayden tensioner.