Stock and aftermarket parts from 2013 Wide Glide
#1
05-16-2016, 08:17 PM
Aftermarket parts from 2013 Wide Glide, exhaust, bars, fuel controller
Hi, I am selling a few items from my 2013 Wide Glide I have replaced with other parts over the last couple of years. Parts are either the original or bought new by me, and typically in great condition with little wear.
Prices are listed, free local pickup, cash only (Minneapolis, MN area) or add shipping costs to lower 48 states, paypal only.
Any questions feel free to ask!
Update: Moved stock parts to here:
https://www.hdforums.com/forum/stock...her-parts.html
Crusher Staggered Dual Exhaust Powercell – 562 w/quiet baffles $275 sold!
Bassani FireSweep Series Exhaust System - 13113D $225 sold!
EJK Controller 09120388 w/bypass $125 sold!
WILD 1 (#WO624B) HANDLEBAR CHUBBY 14"OUTLAWZ BLACK $140 sold!
Arlen Ness Ness-Tech Oil Pressure Gauge Kit - 15-658 $125
Kuryakyn ISO grips $30 sold!
Kuryakyn Dually Trident ISO-Pegs w/Male Mount Adapter - 7592 $40
Avon Grips Gel Footpegs - Black Anodized FP-GEL-70-ANO $40 sold!
Figure Machine TCFLOW-R5 Air Cleaner $100
The Crusher exhaust sounds great with the quiet baffles in...took the raspiness out and gave it a deeper and a little quieter sound. Good power also. Used the Kuryakyn wild things 482 gaskets and no decel pop. Also, does not have all the 5/16" bolts so you will have to buy some. I used my 12mm O2 sensors so the 18mm bungs are plugged.
The Bassani Firesweeps sounded great at first but became louder, and couldn't change the baffles as they are welded in. Stock tapered Harley gaskets worked great as the head pipes have a taper on them. Used the EJK controller with the O2 bypasses so the 18mm bungs are plugged. No 12mm bungs on this pipe.
Wild 1 Chubby Outlawz are a great bar. Very solid and comfortable. Didn't like the narrowness of them and wanted chrome also. You will have to get the left side grip off, as it is glued on pretty well.
The EJK controller works great for a stage one, but I have cams in my bike.
The oil pressure gauge was used for 1 day. The threads on one of the fittings didn't fit quite tight and leaked a little(but still worked fine), so they sent me out a new fitting- that's why there are 2 in the pic.
Both the Kuryakyn and Avon footpegs were only used a day or 2 so they are like new.
Prices are listed, free local pickup, cash only (Minneapolis, MN area) or add shipping costs to lower 48 states, paypal only.
Any questions feel free to ask!
Update: Moved stock parts to here:
https://www.hdforums.com/forum/stock...her-parts.html
Crusher Staggered Dual Exhaust Powercell – 562 w/quiet baffles $275 sold!
Bassani FireSweep Series Exhaust System - 13113D $225 sold!
EJK Controller 09120388 w/bypass $125 sold!
WILD 1 (#WO624B) HANDLEBAR CHUBBY 14"OUTLAWZ BLACK $140 sold!
Arlen Ness Ness-Tech Oil Pressure Gauge Kit - 15-658 $125
Kuryakyn ISO grips $30 sold!
Kuryakyn Dually Trident ISO-Pegs w/Male Mount Adapter - 7592 $40
Avon Grips Gel Footpegs - Black Anodized FP-GEL-70-ANO $40 sold!
Figure Machine TCFLOW-R5 Air Cleaner $100
The Crusher exhaust sounds great with the quiet baffles in...took the raspiness out and gave it a deeper and a little quieter sound. Good power also. Used the Kuryakyn wild things 482 gaskets and no decel pop. Also, does not have all the 5/16" bolts so you will have to buy some. I used my 12mm O2 sensors so the 18mm bungs are plugged.
The Bassani Firesweeps sounded great at first but became louder, and couldn't change the baffles as they are welded in. Stock tapered Harley gaskets worked great as the head pipes have a taper on them. Used the EJK controller with the O2 bypasses so the 18mm bungs are plugged. No 12mm bungs on this pipe.
Wild 1 Chubby Outlawz are a great bar. Very solid and comfortable. Didn't like the narrowness of them and wanted chrome also. You will have to get the left side grip off, as it is glued on pretty well.
The EJK controller works great for a stage one, but I have cams in my bike.
The oil pressure gauge was used for 1 day. The threads on one of the fittings didn't fit quite tight and leaked a little(but still worked fine), so they sent me out a new fitting- that's why there are 2 in the pic.
Both the Kuryakyn and Avon footpegs were only used a day or 2 so they are like new.
Last edited by EC1956; 05-18-2017 at 07:34 PM. Reason: Bassani's sold, Outlawz sold, EJK sold, Crushers sold, grips sold
#7
05-19-2016, 04:27 PM