Mark this thread as Unsold
V&H Big Radius 2 - 2 Exhaust
#1
V&H Big Radius 2 - 2 Exhaust
V&H Big Radius
No Heatshields
Needs re-wrapped
Dent/scrape damage on front pipe lower.
Fairly louder, has the louvered baffles. I thought it sounded great.
Exhaust was on my 2012 Fatbob when I bought it. I rode the bike 3k miles with this exhaust. Turns out, with my suspension setup the lean angle allowed for the pipe to scrape on the tail of the dragon. I was somewhat surprised, thought it was just the peg mount.
Either way, metal is still solid on the dent, mostly a dent not missing much thickness. Rode another 1,000 miles after tis happened. Went with a FatCat in the end so these are for sale cheap.
they have the larger 14mm bungs so is most likely for the older version but it mounted fine with bung adapters.
$75 shipped
Pipes are good
No Heatshields
Needs re-wrapped
Dent/scrape damage on front pipe lower.
Fairly louder, has the louvered baffles. I thought it sounded great.
Exhaust was on my 2012 Fatbob when I bought it. I rode the bike 3k miles with this exhaust. Turns out, with my suspension setup the lean angle allowed for the pipe to scrape on the tail of the dragon. I was somewhat surprised, thought it was just the peg mount.
Either way, metal is still solid on the dent, mostly a dent not missing much thickness. Rode another 1,000 miles after tis happened. Went with a FatCat in the end so these are for sale cheap.
they have the larger 14mm bungs so is most likely for the older version but it mounted fine with bung adapters.
$75 shipped
Pipes are good
#6
Got this one sold, I do have a stock dyna exhaust that had the cat removed and an Hpipe welded in. Meant to be a stealth sleeper pipe as it will make plenty of power under the curve.
Thread
Thread Starter
Forum
Replies
Last Post