Hi, I have a 2017 Road King which I previously installed 16" apes internally wired with no problems. Today I went to install a memphis shades fairing and windshield and found that the bars needed to be pulled back a bit so I made the adjustment and now I have zero activity in either switch. I can turn the tank switch on and it functions as normal but nothing works on either switch. I'm guessing I have a wiring issue somewhere but any ideas where to start? The ground wire on the riser seems to be snug. I'm stumped. Thanks.

 

Gonna be a bad wiring issue for sure. Computer says lost communication with body control module. Yuck

 

 

• broken wire fixed but still switches won’t do anything

 

 

5A battery fuse was bad due to the broken wire. I'd like to thank myself for all the help I gave myself here.