I am talking the standard no wet heads and non compression release heads. Been thinking of picking up a set of heads to get ported and polished to not have down time and was curious when I ran across a set of 103 heads for my 95 inch build. Anyway. Thanks in advance

 

sure they will.you`ll just need to get the later manifold flanges

 

OP: I have a set of 103 heads off my 2014 Breakout with only 68 miles on them (I put on 68 miles on the brand new bike while waiting for the Stage 4 kit to arrive ).

If interested, PM me. My wife is complaining that I keep too much stuff, and it consumes too much of the limited storage space we have in our cabin.

Jim G

 

if he dosnt want them,PM me,ill probably take them

 

I have a set of stock 103 touring heads with 9k on the clock sir. I'll call you tomorrow

 

Prodrag1320: Another forum member beat both you and misfitJason to PMing me, and I gave him a little time to check whether or not these ACR-equipped heads can accept either manual CRs or the HD Screamin Eagle ACR wiring harness kit in the HD catalog, asa he has a 2005 Deuce. If he does not buy them, misfitJason has first alternate shot at them, and then yourself.

Jim G

 

OK.you can machine & install manual compression releases in the heads very easily,ACR`s can also be machined for & installed,but its a lot more of a complicated process