Engine Mechanical Topics Discussion for motor builds, cams, head work, stripped bolts and other engine related issues. The good and the bad. If it goes round and around or up and down, post it here.

question on lifters

Thread Tools
 
Search this Thread
 
  #21  
Old 05-23-2017, 01:15 PM
ROCKOUT Rocker Products's Avatar
ROCKOUT Rocker Products
ROCKOUT Rocker Products is offline
Sponsor
Join Date: Jul 2015
Location: SF Bay area
Posts: 8,529
Received 1,628 Likes on 1,176 Posts
Default

You can check the tubes by dropping them one at a time, start the engine (holding the tube away from the PR) & see if the noise goes away. Some oil may drip out, not a big deal.


__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below... For all Twin Cams and Evo Big Twins & Sporsters
 
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!


  #22  
Old 05-24-2017, 09:24 PM
Teardrop's Avatar
Teardrop
Teardrop is offline
Road Warrior
Join Date: Jan 2010
Location: Salem, Or
Posts: 1,290
Likes: 0
Received 20 Likes on 13 Posts
Default

Originally Posted by Road Star
Yeah, they are $149 each, for the top of the line. Their standard lifter is $79, for one.

I found a set (4) of the S&S premium lifters for $269 and cheaper if you have amazon prime.
 
  #23  
Old 05-24-2017, 10:11 PM
Road Star's Avatar
Road Star
Road Star is offline
Seasoned HDF Member

Join Date: Dec 2012
Location: Orange County
Posts: 6,421
Received 412 Likes on 250 Posts
Default

I changed the oil and after running it for a while it quieted down.
 
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
LIVINtheLIFE
Touring Models
13
07-04-2019 01:56 PM
roundy
Touring Models
8
11-12-2018 03:46 PM
imbuhlman
Engine Mechanical Topics
4
10-29-2018 07:00 AM
johnod
EVO
32
01-04-2016 02:20 PM
MaxShovel
Shovelhead
4
10-01-2008 05:29 AM



Quick Reply: question on lifters



All times are GMT -5. The time now is 06:45 PM.