Does anyone have any experience with the Vance & Hines 575 Performance Cam?


I have been looking at cams and cannot find any reviews on it...


I already have the radius 2 into 2, FP3 and upgraded air filter...


What about the quickie pushrods... S&S or the tapered Screaming Eagle ones?


Thanks in advance

 

Off top of my head it has an intake close of 40. Might be little soft on bottom end RPMs and stock compression. But I'm sure it was designed for a stock motor so give it a try

 

Also was wondering does Vance and Hines have a good download for your fuel pack? Since you have all their components They should. Many feel the fuel pack cannot support stage two motor but I'm sure their support would confirm or deny that.

 

I've been very happy with my FP3 especially since I ran the auto tune a few times but yes it does have a cam selection feature... another reason why I asked about the VH cams... their R&D dept is really good so I doubt they'd put their name on junk

 

This is true. It's too bad there's not much info on them I have also looked a few years back. Curious as to what their feedback is from Their testing.

 

I most certainly will give MY review once I get them installed... I ordered them on 18th from JPcycle.com free shipping and additional 10% off my gold membership price was $367.64
received them today (20th)

ill take photos and give review along way

 

Cool man. I here the FP3 is nice and easy to auto tune as well.

 

Omg... if I had to pick one thing I've done to my bike as the favorite it would have to be that FP3...

My wife has one on her superglide and my son put one on his 48

if you want to see how it works download the app and play with the Demo mode... for both iPhone and Android...

Can't say enough nice things about it...
you choose your Bike, Pipes and Air cleaner combination and flash your bike with the appropriate map...

it then has an auto tune feature that creates a custom map by the way you ride

too many cool things to mention here... download the app

 

If the intake close is at 40, then 10.0 cr would be a good compression ratio.
Scott

 

There are so many tried and tested cams for every kind of twin cam that I don't know why a company would bring out another cam now when some of the bikes have already gone to the m8 engine and more will follow soon. Ditto why you wouldn't simply use one of the tried and tested cams too