Can I do a 113" kit on my CVO 110 using stock parts?
#11
04-18-2018, 09:27 AM
Sponsor
Yes.
The S/E backing plate(or Ness) needs to be bored to 2.500" and radiused to accommodate the use of the much needed 58mm S/E t/body.
The 110" head has a port ID of 1.750", and the OE 110" intake manifold ID is no larger than 1.660"........ .090" mismatch, saying nothing of the increased 58mm bore size.
Even 110" powerplants, can be extremely formidable.
Scott
The S/E backing plate(or Ness) needs to be bored to 2.500" and radiused to accommodate the use of the much needed 58mm S/E t/body.
The 110" head has a port ID of 1.750", and the OE 110" intake manifold ID is no larger than 1.660"........ .090" mismatch, saying nothing of the increased 58mm bore size.
Even 110" powerplants, can be extremely formidable.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
Thread
Thread Starter
Forum
Replies
Last Post
nsnorgrass
Milwaukee Eight (M8)
5
11-08-2016 05:25 AM
