Looking for SE Push Rods Jam nut.
#11
The SE Quick Install Tapered (PN 18404-08) referenced in the OP have 5/16" x 24tpi jam nuts. When introduced a few years back, there were issues with poor quality jamb nuts that would hairline crack when tightened and loosen after a few miles. The MoCo seems to have solved the problem and I still run them in one of my bikes which make 110HP/124TQ; no issues since installation about 25K miles ago.
and it was a new production set
so problem still hasnt been resolved
I installed Quickies instead because thats what I had
#12
How do you know it was a new production set? All I can say is that I have had no issues with the set I am running in one of my bikes and they have been R/Rd several times. I will continue to use them but that's why there are alternatives.
#13
I could be wrong for sure
I do Like the Quickies better once I tried them but thats my personal opinion
#14
#15
90499A810... where have I seen that before
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#16
#17
#18
More confirmation is always a good thing for the OP
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters
#19
#20
When I measured mine the first time it was through the zip loc bag I had them in.... I didn't realize the threaded part had FOUR flats on it & I was measuring across the flats.
Soooo.... I own this. PM me your name & shipping address & I'll send you the nuts off of mine. Or, I'll PayPal you the $12, your choice.
My sincere apologies for the trouble.
John
__________________________________________________ ____
For ROCKOUT information & purchasing please click HERE For all Twin Cams and Evo Big Twins & Sportsters