Road king top engine mount
Thread Starter
|
Stage III
Joined: Apr 2019
Posts: 3
Likes: 0
From: Junction City Oregon
Road king top engine mount
I recently purchased a pair of screaming eagle cylinder heads for my 2012 road king. The heads are not threaded for the top engine mount. I was told by the seller that the head could be drilled to accept the mount bracket. I compared my factory head to the screaming eagle head, and noticed there is no boss casted into the screaming eagle head to drill the holes in. Has anyone drilled one of these heads successfully?
Road Master
Joined: Apr 2010
Posts: 1,211
Likes: 69
From: Orange County, NY
I recently purchased a pair of screaming eagle cylinder heads for my 2012 road king. The heads are not threaded for the top engine mount. I was told by the seller that the head could be drilled to accept the mount bracket. I compared my factory head to the screaming eagle head, and noticed there is no boss casted into the screaming eagle head to drill the holes in. Has anyone drilled one of these heads successfully?
Thread Starter
|
Stage III
Joined: Apr 2019
Posts: 3
Likes: 0
From: Junction City Oregon
@Hillsidecycle.com should be able to answer this question for you in a jiffy.
Thread
Thread Starter
Forum
Replies
Last Post
strange1
Primary/Transmission/Driveline/Clutch
0
Aug 15, 2006 04:28 PM
