Crankcase vent/breather after installing hypercharger
#11
Cool, thanks.
I also personally dont see the difference in venting between the two. Some people put filters on the ends but how much chance is there something would get sucked into the engine thru the breather tube? Especially on the top breathers with the umbrella valve. Not enough chance for me to put a filter or catch can over the end of it. A drip or two each ride on my garage floor reminds me of its unique character.
I also personally dont see the difference in venting between the two. Some people put filters on the ends but how much chance is there something would get sucked into the engine thru the breather tube? Especially on the top breathers with the umbrella valve. Not enough chance for me to put a filter or catch can over the end of it. A drip or two each ride on my garage floor reminds me of its unique character.
#13
Route the crankcase breather hose and transmission vent hose to the right side, tuck the ends of the hoses between the frame and the exhaust system support. No catch can, no filter.
This has worked for me on this bike (89 Softail) for 30 years.
This has worked for me on this bike (89 Softail) for 30 years.
Last edited by Dan89FLSTC; 02-15-2019 at 09:08 AM.
#14
Join Date: Nov 2010
Location: Red Banks, Mississippi
Posts: 17,464
Received 3,940 Likes
on
2,295 Posts
There are a ton of options for an External Breather System (EBS) for the Evo's. They can be seen HERE.
#15
There are a ton of options for an External Breather System (EBS) for the Evo's. They can be seen HERE.
Save me time and to be honest, didn’t cost me that much more with your kit. Second breather kit I irdered through DK.
No point in wastin time oiecing one together your self.
The following users liked this post:
DK Custom (02-15-2019)
#16
I as goin nuts trying to gather the parts I needed for mine. Then decided to just get them from you instead.
Save me time and to be honest, didn’t cost me that much more with your kit. Second breather kit I irdered through DK.
No point in wastin time oiecing one together your self.
The following users liked this post:
DK Custom (02-15-2019)
#18
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
I as goin nuts trying to gather the parts I needed for mine. Then decided to just get them from you instead.
Save me time and to be honest, didn’t cost me that much more with your kit. Second breather kit I irdered through DK.
No point in wastin time oiecing one together your self.
Then again I don't run a filter nor do I see a need for one.
#19
#20
Join Date: Jan 2011
Location: Haslet Texas
Posts: 20,999
Likes: 0
Received 4,317 Likes
on
1,946 Posts
The following users liked this post:
splattttttt (02-16-2019)