I read a posting about fixing the base gasket leak using something called the Hayden brass oil "jets" fix. I can't seem to find a location on the internet to see pictures of these brass fittings that go in the crankcase oil feed holes or find a place to buy them. Any help pointing me in the right direction would be appreciated. Thanks!

 

lesgf

here is where i bought mine,
http://www.parts123.com/parts123/yb....hPage~cadegfea
type in hayden oil fix for product description

here is a write up on this forum,
https://www.hdforums.com/m_123828/tm.htm

here is the web site,
http://www.haydensm6.com/tof_single.htm

Google searchis a wonderful thing........................

later...............................

 

 

Thanks!

 

good bit of kit.

but be *VERY* careful not to drop that little brass grommet into the cases. It is not magnetic.....................

 

We use the "pig Tails" and they work well.

 

V-Twin part#16-0911 is a kit that you use a tap to thread the jugs and nipples that screw into them. No way they could leak then (unless you forget to put gasket on)Most aftermarket shops carry (can order) V-Twin parts