100 hp and 100 Ft-lb of torque on 80c.i
09-22-2010, 08:18 PM
Join Date: Dec 2007
Location:
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Loretta's getting 90/90 at the tire with stock ported heads, stock cv, 11.25:1 pistons, EV59 and baffled cycle shack pipes. Very road friendly, she's happy with 93 octane too.
08-02-2016, 08:17 PM
Join Date: Mar 2010
Location: Poolville
Posts: 17,588
I Know, I Know.... It's an old thread but what the hell.... Got close but that only counts in horse shoes, grenades and Other Heavy Artillery...96.8/96.5 @ 10.8:1
08-02-2016, 08:27 PM
Join Date: Aug 2008
Location: Lafayette, Louisiana
Posts: 21,753
Quote:
Originally Posted by 98hotrodfatboy
I Know, I Know.... It's an old thread but what the hell.... Got close but that only counts in horse shoes, grenades and Other Heavy Artillery...96.8/96.5 @ 10.8:1
I take it that was before your engine grenaded.
Damn, that was cold!
08-02-2016, 09:29 PM
Join Date: Mar 2010
Location: Poolville
Posts: 17,588
Quote:
Originally Posted by
Prot
I take it that was before your engine grenaded.
Damn, that was cold!
Yea sure was... Thanx For the laugh Prot.... It's all good... I Think the next one Will be up There though. Should be inn the road by the 14th.. Wifey is picking up the stroked case in the morning...
08-03-2016, 07:05 AM
Join Date: Jun 2014
Location: Findlay, Ohio
Posts: 88
Likes: 0
I had Hillside do my heads, also big bore 10.5 to 1 wiseco flat top pistons,
Woods 6h cam, fat cat exhaust. Dyno at 91hp and 93 tq at 5200 rpm.
Plan to re dyno next year after I put some miles on the motor.
08-03-2016, 08:43 PM
Join Date: Mar 2010
Location: Poolville
Posts: 17,588
Quote:
Originally Posted by
nukie
I had Hillside do my heads, also big bore 10.5 to 1 wiseco flat top pistons,
Woods 6h cam, fat cat exhaust. Dyno at 91hp and 93 tq at 5200 rpm.
Plan to re dyno next year after I put some miles on the motor.
No need to put it back on the dyno.... that is unless you have money to burn. What are you looking to achieve?
08-03-2016, 09:51 PM
Join Date: Jul 2010
Location: Melbourne
Posts: 853
Likes: 0
110hp & over 100 ft lbs from an 80" Evo with Stock heads....
Just bolt a turbo on the side and the numbers just appear!
08-04-2016, 02:11 AM
Join Date: Aug 2008
Location: Lafayette, Louisiana
Posts: 21,753
Quote:
Originally Posted by
GraemeR
110hp & over 100 ft lbs from an 80" Evo with Stock heads....
Just bolt a turbo on the side and the numbers just appear!
If you are using a turbo, you are leaving a lot of power on the table with the stock heads. It's easy to get Evo heads to flow better.
Post pictures of the turbo system on your bike.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Adam87t2
EVO
12
06-07-2017 08:18 PM
wickedneck
Touring Models
21
05-12-2010 07:21 AM
brokeboystreetglide
Exhaust System Topics
35
12-29-2009 05:11 PM
FXDLBill
Dyna Glide Models
4
08-25-2006 08:05 AM
NightTrainKid
Softail Models
5
02-27-2006 08:18 PM
100 ,
100hp ,
1997 ,
80 ,
baggers ,
build ,
builds ,
cam ,
davidson ,
eagle ,
evo ,
harley ,
heads ,
hp ,
models ,
screaming ,
torque ,
tricked ,
w6h