softail gas tank for an fxr???
i looked at a softail tank today at the harley shop. the tunnel where the frame backbone resides looked square. if so, then aren't fxr's backbone also square? if the dimensions work out, will it work to use a softail tank on my 92 fxr? if someone has had experience with this, please let me know, i'm curious because i'd like the fat style twin cap tank with the center gauge console.
|
Just got my Flatside tanks back from the powder coater, will be installing them today. My bike is a 95 fxd, which I assume is very similiar to yours. You just have to mount the bracket to your frame at the bottom front and weld the mount for the back on the top of the frame. And yes, the backbone is square with a flat top. Hope this helps. As some on here have said, if you want to do something there is generally a way, and someone has probably already done it.
|
Originally Posted by emwolb
(Post 8034442)
if someone has had experience with this, please let me know, i'm curious because i'd like the fat style twin cap tank with the center gauge console.
http://i587.photobucket.com/albums/s...0/1988FXRS.jpg |
v-twin makes an aftermarket tank like that for FXRs....
http://www.vtwinmfg.com/catalogs/cyr/pdf/345.pdf i have one on my 1990 http://img.photobucket.com/albums/v2...csonon/1-1.jpg |
I've never had the softail tank and an FXR side by side but I've been told the softy tunnel is too narrow. Road King tanks will work if you're going for the tank mounted speedo, FLH tanks will work if you just want extra fuel capacity... FXD's aren't even close, the top tube is much narrower than the FXR. That's just one of the reasons for the FXR's clear superiority as a canyon carver... ;-)
|
Originally Posted by 1990FXR
(Post 8035440)
v-twin makes an aftermarket tank like that for FXRs....
http://www.vtwinmfg.com/catalogs/cyr/pdf/345.pdf i have one on my 1990 http://img.photobucket.com/albums/v2...csonon/1-1.jpg |
thanks guys, that's just exactly what i was looking for. yeah, the fatbob style tank is what i was looking for, you guys gave me all the information i needed, now i can proceed with my project without as much guessing.
|
Originally Posted by Nate88hd
(Post 8037368)
Does your 6 post key switch work? If so what wiring modifications? Looks awsome
wouldnt be hard to re-route/extend that wiring up to there tho i appreciate the compliment |
"no i dont have it hooked up (see the ignition key below the back of the tank)"
That ought to keep a thief flustered for a while... ;) |
All times are GMT -5. The time now is 04:23 PM. |
© 2024 MH Sub I, LLC dba Internet Brands