Ultima Roller Rockers?
#1
Ultima Roller Rockers?
Anyone here using Ultima roller rockers in their Evo? If so; what's your opinion's on them - good or bad? I saw these on Ebay" item # 310544448328 Shure is a price difference over S&S or Crane.
Last edited by Broncobilly72; 01-06-2013 at 11:00 PM. Reason: Ebay Url didn't work
#3
113fatboy,
Thanks for the reply! Yeah, I also noticed that the Ultima rockers are a different ratio than stock. They don't seem to be offered in the stock HD ratio? I will probably just keep the oem Harley rockers, when I install my Andrews EV27 cam and lifters. I will be raplacing the tappets though.
Thanks for the reply! Yeah, I also noticed that the Ultima rockers are a different ratio than stock. They don't seem to be offered in the stock HD ratio? I will probably just keep the oem Harley rockers, when I install my Andrews EV27 cam and lifters. I will be raplacing the tappets though.
#4
#5
I figured with the EV27, roller rockers wouldn't make much difference in power. Probably quiet down the top end a little. Ultima doesn't make the roller rockers in the stock HD ratio - to my knowledge (I may be wrong though).
#6
We tried them a few years ago............had about a 60% failure rate.
We WILL NOT subject our clients to that.
S&S rockers are what we used prior, and we do not deviate from those at this point.
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#7
Thanks for that info! With the EV27 cam I am getting around to installing, I think I will just stay with the HD factory rockers. Can't see spending the extra $, on that mild of a cam.
Thread
Thread Starter
Forum
Replies
Last Post