primo rivera starting issues help!!!!!!
#1
primo rivera starting issues help!!!!!!
ok here's my settup
i have an s&s v111" super stock ignition
using the stock inner and outter harley primary (vented)
a primo rivera 1 3/4" brute 3 belt drive
a rev tech 6 speed tranny
a spyke 1.4 kw starter
and a drag specialties battery (gel)
my problem is every like 3rd or fourth start its grinding kinda like
when you restart your car??
when it was happening or i should say b4 it happens i'd leave it in first gear bump back on the starter then pull clutch and start it seemed to clear it up
i havta test that again though
ok other thought may be crazy i swapped out the old starter bolts for stainless steel versions of them now i'm thinking is it possible these bolts which stretch more than grade 8 bolts...are they loosening up under the pressure???
i have an s&s v111" super stock ignition
using the stock inner and outter harley primary (vented)
a primo rivera 1 3/4" brute 3 belt drive
a rev tech 6 speed tranny
a spyke 1.4 kw starter
and a drag specialties battery (gel)
my problem is every like 3rd or fourth start its grinding kinda like
when you restart your car??
when it was happening or i should say b4 it happens i'd leave it in first gear bump back on the starter then pull clutch and start it seemed to clear it up
i havta test that again though
ok other thought may be crazy i swapped out the old starter bolts for stainless steel versions of them now i'm thinking is it possible these bolts which stretch more than grade 8 bolts...are they loosening up under the pressure???
#2
#4
#5
#6
#7
Trending Topics
#8
well why i think it's happening or i should say why bouncing back on it is working is the pinion gear is getting caught....talking with the guys from spyke they sent me a simple relay settup to circumvent my thunder heart controller stating the thunder heart controller uses a micro 30a relay and when it get's hot is not enough to turn the starter and return the pinion gear
Thread
Thread Starter
Forum
Replies
Last Post
Nazarah
Dyna Glide Models
11
03-26-2011 07:04 PM