A Ton of FXR Parts
#1
A Ton of FXR Parts
I have a ton of FXR parts. I had a 1990 FXR that I obviously did a lot of work to. There is too much to list. I have included a bunch of pictures so if there is something you're interested in you can reply below or PM me.
Some of these parts will fit on Sportsters, Older FXR's, Newer FXR's and the newer FXR2's, 3's and 4's. I can't guarantee fitment but will do my best to help someone to check out fitment on what they have and are interested in. I'd like to think I have a good knowledge of the FXR since I owned mine for 15 years, put a bunch of miles on it and did almost all the work myself.
If you are going to ask for a price or make an offer PLEASE INCLUDE YOUR ZIP CODE. I ask for a zip code so I can get a guesstimate on shipping costs.
Realize that these parts are cross posted. That means that they are posted on other sites on the internet and people can make offers and items that are pictured can be sold elsewhere. Time and Date Stamp will rule the order of who's first. I will do my best to keep each internet posting up to date on what is sold in the pictures.
******ITEMS THAT ARE SOLD********
-Mid Control Parts (Shift Lever, Brake Lever, Both Peg mounts)
-Black Gas Tank Console Cover
-Primary Inspection Cover w Shifter hole
-Primary Inspection Cover Gasket
-Plastic Shifter Shaft Tube
-Short Shifter Linkage
-Screamin' Eagle Fork Brace
-Velva-Ride Front Engine Mount
-Tachometer
-Rear Pulley
-Rear Pulley Chrome Cover
-Rear Shocks
-Black Front Master Cylinder
-Tall Sissy Bar
-Windshield Bag
-Windshield w/ Chrome Lowers
-Switch Housings
-Throttle Cables
-Clutch and Brake Levers
-Switches
Thanks and hope to help keep those FXR's out there going.
I've added some updated pictures of the switches because there have been people asking about them. These pictures show the current condition of the switches. I obviously did some scavenging from the time the pictures were last taken till now. Sorry, I didn't realize there would be such an interest in the switches.
Some of these parts will fit on Sportsters, Older FXR's, Newer FXR's and the newer FXR2's, 3's and 4's. I can't guarantee fitment but will do my best to help someone to check out fitment on what they have and are interested in. I'd like to think I have a good knowledge of the FXR since I owned mine for 15 years, put a bunch of miles on it and did almost all the work myself.
If you are going to ask for a price or make an offer PLEASE INCLUDE YOUR ZIP CODE. I ask for a zip code so I can get a guesstimate on shipping costs.
Realize that these parts are cross posted. That means that they are posted on other sites on the internet and people can make offers and items that are pictured can be sold elsewhere. Time and Date Stamp will rule the order of who's first. I will do my best to keep each internet posting up to date on what is sold in the pictures.
******ITEMS THAT ARE SOLD********
-Mid Control Parts (Shift Lever, Brake Lever, Both Peg mounts)
-Black Gas Tank Console Cover
-Primary Inspection Cover w Shifter hole
-Primary Inspection Cover Gasket
-Plastic Shifter Shaft Tube
-Short Shifter Linkage
-Screamin' Eagle Fork Brace
-Velva-Ride Front Engine Mount
-Tachometer
-Rear Pulley
-Rear Pulley Chrome Cover
-Rear Shocks
-Black Front Master Cylinder
-Tall Sissy Bar
-Windshield Bag
-Windshield w/ Chrome Lowers
-Switch Housings
-Throttle Cables
-Clutch and Brake Levers
-Switches
Thanks and hope to help keep those FXR's out there going.
I've added some updated pictures of the switches because there have been people asking about them. These pictures show the current condition of the switches. I obviously did some scavenging from the time the pictures were last taken till now. Sorry, I didn't realize there would be such an interest in the switches.
Last edited by kopr2020; 04-08-2017 at 09:19 AM. Reason: Sold some Items
#7
Trending Topics
#8
With the Windshield, I'm thinking a '78 may has smaller forks (35mm, I think??) than a '90 (39mm, I know) so if that IS the case the clamps I have would not fit. If he's upgraded (common thing) to 39mm then I think they would fit. Otherwise there would have to be some modifying of my clamps or something inserted between the clamp and fork tubes to take up the 4mm difference.
Would your buddy be looking for the Side Plates as well? I don't have a clue on bolt pattern or layout on a '78. Best I could do is take some pictures with a tape measure next to the Side Plates and Small Backrest so you guys can see if things will work.
As far as the Leather Tool Bag, it is universal so I don't see that being a problem fitting.
Would your buddy be looking for the Side Plates as well? I don't have a clue on bolt pattern or layout on a '78. Best I could do is take some pictures with a tape measure next to the Side Plates and Small Backrest so you guys can see if things will work.
As far as the Leather Tool Bag, it is universal so I don't see that being a problem fitting.
#10
@FLSUTC I'll figure out the shipping, pricing and send you a PM on the 5 items. Wait, just noticed your a new member and can't send you a PM. you have an email I can send that info to?
As far as the Engine Mounts, I believe the only ones in the picture are the 2 Front Motor Mounts (For 80 - 08 FXR and FLT's), one is a stock Motor Mount and the other is a Velva-Ride Front Motor Mount (Drag PN# DS-243610)
As far as the Engine Mounts, I believe the only ones in the picture are the 2 Front Motor Mounts (For 80 - 08 FXR and FLT's), one is a stock Motor Mount and the other is a Velva-Ride Front Motor Mount (Drag PN# DS-243610)