Evo Crate Motor
Just picked up an Evo crate motor from the local HD shop. All crate motors are '99 models, come with the alternator, oil filter,and ignition, but no intake. Also get a statement/certificate of origin from HD.
Initial impression right out of the box is, "Nice!" There is no shiny cover on the ignition cavity, and the cases and cam cover have that rough casting texture. Hadn't seen one with the cam cover the same texture as the cases. I kinda like it - less shine for me to have to mess with. Rocker covers are polished. I got the plain-jane motor - no black & no chrome. Gotta run the gas outta the tank, and then I'll start pulling the old motor out. It has a bad leak at the motor sprocket area behind the alternator. Seems some idiot used a sheet metal screw to fasten the stator wire clamp to the crankcase. Caused a minor crack that seeped for awhile. Thought it was the seal, and while that was some of it, it wasn't all. I run a semi-open primary & primo belt, so an oil leak makes a mess. Next winter the old engine will get the HD reman treatment, and hopefully be the basis of a new bike. |
RE: Evo Crate Motor
If you don't mind my asking, I'd be interested what you paid for the creat motor!
|
RE: Evo Crate Motor
ORIGINAL: pococj...Next winter the old engine will get the HD reman treatment, and hopefully be the basis of a new bike... I looked into the 'option', but since they return the motor to 'original' specificatins (they will remove any aftermarket cams, lifters, etc...I think it's a better choice to rebuild it yourself, or find a motor guy who has the equipment to do it for you. Unless you want a stock motor. |
RE: Evo Crate Motor
Me too. I thought the dealer had to perform that service.
MikeyB |
RE: Evo Crate Motor
Cost was $2995 total.
I was asked about doing a reman job on my original motor, but didn't want to lose the riding time. I told them I'd probably send it in this coming winter to get a reman job done on it, then use it as the basis for another bike. No mention was made that the dealer had to remove/install, though I have heard that they have to do the work to keep the 90 day warranty intact. I'm not worried about that. I played hot-rod-harry when I was a young pup with my Sportsters. Did the stroker, hot cams, etc. routine. Don't care now, just like to ride. Stock bike'll go faster than any speed limit I run across, so no big deal. My original crankcases have a crack that is worsening. For the HD reman price I can get a new motor for quite a bit less than any local shop has estimated. Since I want a stock motor, the reman seemed the way to go. |
RE: Evo Crate Motor
So you're saying there are two routes available for Reman? Send the old motor in and have it rebuilt or buy an already rebuilt motor without a core charge? Is this right?
|
RE: Evo Crate Motor
ORIGINAL: ssls6 So you're saying there are two routes available for Reman? Send the old motor in and have it rebuilt or buy an already rebuilt motor without a core charge? Is this right? |
RE: Evo Crate Motor
ORIGINAL: pococj ORIGINAL: ssls6 So you're saying there are two routes available for Reman? Send the old motor in and have it rebuilt or buy an already rebuilt motor without a core charge? Is this right? |
RE: Evo Crate Motor
So it's the B (balanced) motor?
|
RE: Evo Crate Motor
ORIGINAL: ASQTec So it's the B (balanced) motor? |
All times are GMT -5. The time now is 01:06 AM. |
© 2024 MH Sub I, LLC dba Internet Brands