Wiring LED turning signals
I have a 1992 Harley Softail fxsts and was able to wire up a pair of Kuryakn torpedo LED turn signals for the rear of the bike. Worked perfectly. However, now I'm stuck with the fronts. The original turn signals have 3 wires (purple, black, blue) and the Kuryakn torpedos have 2 wires (white and red). I've wired any combination that I can think of, but the I got them working was when all 4 turn signals, headlight and tailight flashed simultaneously? Any help or advice is most appreciated. Thanks.
|
Originally Posted by Gheddy2112
(Post 17300275)
I have a 1992 Harley Softail fxsts and was able to wire up a pair of Kuryakn torpedo LED turn signals for the rear of the bike. Worked perfectly. However, now I'm stuck with the fronts. The original turn signals have 3 wires (purple, black, blue) and the Kuryakn torpedos have 2 wires (white and red). I've wired any combination that I can think of, but the I got them working was when all 4 turn signals, headlight and tailight flashed simultaneously? Any help or advice is most appreciated. Thanks.
Something like this: |
Thank you very much for the response. Most helpful. |
All times are GMT -5. The time now is 02:39 AM. |
© 2024 MH Sub I, LLC dba Internet Brands