Which of these 2/1 pipes
I have a fxdi looking to replace the freedom pipes that are on it now. Would like a 2/1 that won’t break the bank but preform decent and work when time comes to upgrade to a 98” build.
The 3 pipes below are what I’m looking at. What’s your thoughts on which one preforms best? https://cimg6.ibsrv.net/gimg/www.hdf...f30185703.jpeg Here is what is on the bike now. I guess it could be there’s not much difference in what I have now and the above 2/1 pipes? https://cimg6.ibsrv.net/gimg/www.hdf...286c891681.jpg |
I signed on and have not a opinion on what would be best. I would think however that a two into one would be better then what you have. They would have some crosover effect which is helpful.
My bike had a set of pipes like you have now. Had no engine breaking and way too loud. |
Supertrapp!
|
super trap super meg,, or VH pro-pipe hs,,,,,,most anything would be better than what you have,,,,the shrt shot deal pipes lose across the board for power in most cases. they sound good but other systems run better.
m |
I like the super trap as much as any one but it’s up over 800$ and I would like to find a pipe closer in range to what’s posted up above something is the 500-600 range
|
Danemoto has an unusual 2 into 1 stainless steel pipe, less than $300.
|
Do yourself a favor and bite the bullet and buy the quality part,,,especially if you have future upgrades planned. The Super Trap will work for you in almost any engine mod that you might choose to do. There is a reason that good parts cost money......the pro pipe he is a strong second, but I think that if you shop around you might find better pricing.
M |
Originally Posted by marcodarq
(Post 16942174)
Do yourself a favor and bite the bullet and buy the quality part,,,especially if you have future upgrades planned. The Super Trap will work for you in almost any engine mod that you might choose to do. There is a reason that good parts cost money......the pro pipe he is a strong second, but I think that if you shop around you might find better pricing.
M The the RR 13222J is at a good price. It’s shaped like the rr2 mega pipe and has stepped head pipes. I ass/u/me ed it would be a decent power producer. Especially seeing how I will never go over a drop in cyclinder kit, so it really only need to exhaust 98” of motor reving out to about 5500. |
I called Fuel Moto and asked them and took their advance. They were very helpful and I have the exhaust on the way and a tune in my email :)
|
When price isn't an issue it's looks and sound right .
|
All times are GMT -5. The time now is 10:43 PM. |
© 2024 MH Sub I, LLC dba Internet Brands