Evo engine - oil out one exhaust
#1
Evo engine - oil out one exhaust
OK. I have yet to even start my "new" 1988 883. With only 14,900 miles it has been sitting for some 7 years or so. So before even considering turning it over, I poured some Marvel Mystery Oil down each spark plug hole and let it set for a few days while I worked on other things with the bike.
Well today, I decided to put it in gear, take out the plugs and roll the rear wheel to see if it would turn over. It did. On the rear cylinder, it kicked out the Mystery Oil. None came out of the spark plug on the front one, but later I saw it leaking from the exhaust pipe.
Any thoughts on this?
Well today, I decided to put it in gear, take out the plugs and roll the rear wheel to see if it would turn over. It did. On the rear cylinder, it kicked out the Mystery Oil. None came out of the spark plug on the front one, but later I saw it leaking from the exhaust pipe.
Any thoughts on this?
#3
Yup, I agree.
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#4
Thread
Thread Starter
Forum
Replies
Last Post
chiefaponte
Sportster Models
11
03-02-2013 11:45 AM