Need help-Dragtron vs Screaming Eagle AC
#1
Need help-Dragtron vs Screaming Eagle AC
I posted this question on another forum and got no response so I thought I would try this well informed group.
As you can see from my sig, I have a stage III motor and am considering a Dragtron II AC because I like the looks of it. I have found a source that converts these carb only AC's to EFI. My question is; is the Dragtron II able to deliver enough air for my motor, or am I better off staying with the SE?
Thanks,
Marsh
As you can see from my sig, I have a stage III motor and am considering a Dragtron II AC because I like the looks of it. I have found a source that converts these carb only AC's to EFI. My question is; is the Dragtron II able to deliver enough air for my motor, or am I better off staying with the SE?
Thanks,
Marsh
#2
With the build that you have, you probably wouldn't FEEL any change at all. You might see a measured increase on a dynomometer.
PS...IMO...I would save the money and just put an SE/ K&N assembly on, unless you have it on already.
PS...IMO...I would save the money and just put an SE/ K&N assembly on, unless you have it on already.
Last edited by producer; 12-18-2009 at 03:35 PM. Reason: added thoughts
#3
I just looked at the Dragtron, because I've never seen one, They don't look too bad. That price seems resonable too. Get it and give us your results.
#4
#5
Doherty Machine has about the best you can get.
Scott
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#6
#7
Trending Topics
#9