2000 Dyna TC88 Smoke
#1
01-12-2014, 05:02 PM
2000 Dyna TC88 Smoke
Hi All,
I have an original 2000 Dyna with 85,000 miles on her.
Never been apart.
Runs strong and never any problems but in the past while noticed exhaust smoke on the deceleration.
When I snap the throttle, I notice smoke out both pipes.
At normal idle, choke in and warm, no smoke unless throttle snapped closed and on the decel.
I haven't paid close attention to other bikes, but is this more oil and wear related or fuel from the deceleration.
I had plans to do a full top end on the bike this winter.
Thx
Jim
I have an original 2000 Dyna with 85,000 miles on her.
Never been apart.
Runs strong and never any problems but in the past while noticed exhaust smoke on the deceleration.
When I snap the throttle, I notice smoke out both pipes.
At normal idle, choke in and warm, no smoke unless throttle snapped closed and on the decel.
I haven't paid close attention to other bikes, but is this more oil and wear related or fuel from the deceleration.
I had plans to do a full top end on the bike this winter.
Thx
Jim
Last edited by jim70; 01-12-2014 at 05:30 PM.
#3
01-13-2014, 08:14 AM
Sponsor
Hi All,
I have an original 2000 Dyna with 85,000 miles on her.
Never been apart.
Runs strong and never any problems but in the past while noticed exhaust smoke on the deceleration.
When I snap the throttle, I notice smoke out both pipes.
At normal idle, choke in and warm, no smoke unless throttle snapped closed and on the decel.
I haven't paid close attention to other bikes, but is this more oil and wear related or fuel from the deceleration.
I had plans to do a full top end on the bike this winter.
Thx
Jim
I have an original 2000 Dyna with 85,000 miles on her.
Never been apart.
Runs strong and never any problems but in the past while noticed exhaust smoke on the deceleration.
When I snap the throttle, I notice smoke out both pipes.
At normal idle, choke in and warm, no smoke unless throttle snapped closed and on the decel.
I haven't paid close attention to other bikes, but is this more oil and wear related or fuel from the deceleration.
I had plans to do a full top end on the bike this winter.
Thx
Jim
Scott
__________________
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
HILLSIDE MOTORCYCLE & MACHINE, INC.
HARLEY-DAVIDSON SPEED & SERVICE CENTER
5225 SOUTH MAIN ST., MUNNSVILLE, N.Y. 13409
Sales/Support 315-495-6650
www.hillsidecycle.com
Walk-in Retail Showroom
Complete H-D Machine Shop
Case & cylinder boring
Complete Cylinder Head Shop
High-Performance Engine Kits
Crank Rebuilding
Direct Link & PowerVision Tuning
Goodson HD Tooling Manufacturer
Maxton Mile World Record
4500 sq ft. facility
OVER 35 YEARS OF H-D ENGINE BUILDING.
See us on Facebook.
#5
01-14-2014, 05:54 AM
Sponsor
Thread
Thread Starter
Forum
Replies
Last Post
NightTrainJohnny
Dyna Glide Models
0
09-16-2009 10:51 PM