Harley Davidson Forums - Touring Models

Spare Rear Mounting Bracket for Corbin Solo

SnoRider — Sat, 13 Jun 2026 05:26:51 GMT

Does anyone have a spare mounting bracket (rear) for a Corbin solo seat?

Compensator?

1973Plymouth — Sat, 13 Jun 2026 01:39:39 GMT

So last week I installed new grips, didn't recalibrate my throttle. Took it for ride last week after grips, rotors and pads. Today after work I stopped for fuel, it bucked hard when I restarted it. When I got home I reset the throttle and haven't been able to replicate the issue. The start up has a slight clunk and slight at shutdown. Is the Comp bad or was it the throttle not getting along with whatever?

New bike (2010 Electra glide standard) no 02 sensors

James_FXDBI — Fri, 12 Jun 2026 19:57:36 GMT

Hey everyone, been a long while. Here goes. Just bought a 2010 Electra glide standard it has a 2-1 aftermarket exhaust and an after market air filter. Went for a ride not running to great it has no o2 sensors or tuner in my mind these are essential.

help a guy out summers here thanks in advance

James

Tire Repair Kits

hdwd2000 — Fri, 12 Jun 2026 12:22:34 GMT

How many people carry a tire repair kit on their bike, and what is the best one out there. Thanks in advance.

Military Etchings

longrideshields-1 — Thu, 11 Jun 2026 19:15:18 GMT

Friends don't let friends pay full price on a new windshield! Also, through the 4th of July, If as many of you know, we are one of the few that do laser etchings on windshields. We have a large military collection of etchings... If we dont have etchings for your rank, or you have a military specific design we dont have, let us know and we will make it for you with no design fee's so you can have your shield personalized to your specific experience! We are here to serve you!

2000 Ultra Classic fuel pressure?

ScottinAZ — Thu, 11 Jun 2026 18:05:46 GMT

As stated in the title, does anyone here know the specification for fuel pressure on a MM injected 2000 FLHTCUI.... I have a pump in there, but its not specced for the bike. Its for a Ford truck, and I know the regulator on that breaks pressure down to 30PSI.... I dont know what the regulator is on the Harley, and I dont know what the output spec is on the pump. Bike is running with the pump slaved in, but before I button up the tank, I would like to know that its got enough pressure.... I have the proper pump on the way, but who knows when it will get here.....

Opinions Please

GaryM12 — Wed, 10 Jun 2026 15:00:21 GMT

I have a 2012 FLHTK Ultra Limited, just turned 100, 000 kms, which has had very little done to its aesthetics. I am thinking of putting a set of mini apes on it. Looking for opinion as to if its worthwhile to do that from a financial standpoint given the bikes age, along with the comfort factor and any other sort of information anyone cares to inject.

Tips on Removing Baffles (Repacking)

Hecklerboy — Tue, 09 Jun 2026 15:55:44 GMT

My Cobra Race Pro slip-ons are starting to sound a little ratty.
I think it might be time to repack them.
I've never removed baffles before so any tips on getting them out would be greatly appreciated.

Thanks,

Yuasa 500 amp battery

hardheaded — Tue, 09 Jun 2026 15:50:44 GMT

Now that this thing has been out awhile now, what are the opinions on it ?
Good ,bad, over priced, short life or waste of money. I have been running the Deka Big Crank in many of my bikes with good service.

Finned primary cover for a 1998 road king efi

vreynaud28 — Mon, 08 Jun 2026 16:49:22 GMT

Does anyone know who makes a Finned primary cover for a 1998 road king efi
I contacted EMD but they only make starting for the 1999 models
TIA

Throttle Release Noise

Marine Bulldog — Mon, 08 Jun 2026 16:41:10 GMT

I'm curious if any members have experienced this also.
When traveling at about 40-45 MPH, when I release the throttle there is a chirp that seems to come from the rear of the bike. The best I can describe it is if you hit your brakes and your rear tire bites the pavement. There is no feel of a skid, just the sound of a "Chirp". I'm not sure how long this has been going on since I always wear ear plugs. Yesterday after a round trip of about 224 miles (highway) traveling at about 75-80 MPH I stopped to refuel, and removed my ear plugs. Being close to home I didn't put my ear plugs back in. It only happens as far as I can tell during city riding, i.e., slowing for traffic lights and traffic slow downs. When I release the throttle the noise is audible (it's not a loud noise). When I down shift there is nothing out of the ordinary. It's only when I turn the throttle back. I checked my belt tension and it appears to be normal.
My bike is a 2019 FLHT, with Legend shocks.
Any help is appreciated.

SEMPER FI

Model name?

brucea4 — Sun, 07 Jun 2026 19:56:53 GMT

HD had a Electra Glide model that came with the spring solo seat ( similar to the police seats ) and the bottom of the windshields were the color of the bike, blue or red. What was that model named?

Arm rests compatible w Advanblack King Rear Tour Trunk pack?

Jscifers — Sun, 07 Jun 2026 16:12:45 GMT

Hi all--After a group ride in the Smokies, my wife is requesting that I look into getting her arm rests (and a cup holder!) to add to our '17 Street Glide Special. Researching these, it appears most offerings are designed to compatible with the HD Tour Pack, but we have an Advanblack King Rear Tour Trunk pack. Has anyone installed arm rests on a bike with the Advanblack King Tour pack? Looking at Kuryakyn's video (Install the Quick Detach Passenger Armrests by Kuryakyn...

), it looks like they use some existing mounting bolt holes in the HD tour pack to install an adapter for use with quick-detach armrest mounts, and I'm guessing I could modify the Advanblack tour pack to make this work the same way, but would appreciate hearing from anyone who has successfully installed arm rests without too much hassle on the Advanblack product.

The other thing with this is that Kuryakyn and RIvco seem to be the non HD favorites here, with generally good reviews, but their products seem to be out of stock. Amazon has some cheapish alternatives, but I'm concerned about build quality (arm rest flopping around, etc.)...so if anyone has an armrest recommendation, too, that'd be awesome.

Thanks!
John

Anyone ever uses the Mo.unit on their bike?

Vivid_Classic — Fri, 05 Jun 2026 22:34:00 GMT

I recently got my hands on a project bike. It started out as a '95 Electric Glide. I got it down to just the engine and the frame, all the tins were damaged from an accident. I plan on doing my own wiring and I'm wanting to modernize the bike, such modern radio, led lights, etc...while doing research I found the mo.unit to help make wiring easy. I was wondering if anyone has used this unit and the hand control switches, and if it is possible to use their switches to control the radio.

2011 FLHTK Rear Tire Change

N1265 — Thu, 04 Jun 2026 00:27:53 GMT

Hi Guys,

I am debating pulling the rear tire off my 2011 ultra limited to have a new tire mounted, I have done this by myself on a motorcycle jack for the front tire without issue, but for the rear I would like some insight.

Most videos I see of people removing the rear tire on a jack are bikes without a fearing or lowers, seems like the ones doing a full dresser are doing it on a table. Is it safe to do this on a jack with a full dresser with the ABS system to deal with, or is it to sketchy. I am kinda worried if the bike will balance out ok on the jack with the rear wheel removed .

Any advice appreciated, the local dealership currently wants $800 ish to replace the tire and bearings, which is a little much for me right now.

Many Thanks.