Harley Davidson Forums - Dyna Glide Models https://www.hdforums.com/forum/ Super Glide, Super Glide Sport, Super Glide Custom, Dyna Glide Convertible, Super Glide T-Sport, Dyna Glide Police, Dyna Switchback, Low Rider, Street Bob, Fat Bob and Wide Glide. en Thu, 21 May 2026 12:57:50 GMT vBulletin 60 https://www.hdforums.com/forum/images/kirsch/misc/rss.jpg Harley Davidson Forums - Dyna Glide Models https://www.hdforums.com/forum/ FXDF Gauge Relocation Issue https://www.hdforums.com/forum/dyna-glide-models/1494129-fxdf-gauge-relocation-issue-new-post.html Tue, 19 May 2026 14:52:09 GMT I recently ditched the factory tank gauge and used a Guerilla Cable harness setup to add a tach and speedo up on the bars where I can actually see them. After sourcing all the right parts, the... I recently ditched the factory tank gauge and used a Guerilla Cable harness setup to add a tach and speedo up on the bars where I can actually see them.
After sourcing all the right parts, the install was easy enough.

Only problem is that the ABS light is now on and I DO NOT have ABS.

anyone know how to deal with this? I called the nearest dealer (2hrs away) and they didn’t have any idea..

thank you! ]]> Dyna Glide Models Moab https://www.hdforums.com/forum/dyna-glide-models/1494129-fxdf-gauge-relocation-issue.html Help finding brake caliper bracket https://www.hdforums.com/forum/dyna-glide-models/1494111-help-finding-brake-caliper-bracket-new-post.html Tue, 19 May 2026 09:12:23 GMT Hey guys. I bought the wrong calipers for my forks like every other dumbo out there. In my defense I haven’t had a front brake in 15 years. Can someone knowledgeable tell me if there is a... Hey guys. I bought the wrong calipers for my forks like every other dumbo out there. In my defense I haven’t had a front brake in 15 years.

Can someone knowledgeable tell me if there is a purchasable adapter that exists for my situation? I do not know the exact years for my forks only that they may be late 70’s. The dual disc calipers that I bought are for 84-99’ and I can’t get them to mount on the lowers. I’m running two 10” discs on a mag wheel and there is like a millimeter of clearance between the disc and the fork lowers… but they still spin freely.

Any help is appreciated, thank you.





]]> Dyna Glide Models CavemanLouis https://www.hdforums.com/forum/dyna-glide-models/1494111-help-finding-brake-caliper-bracket.html Club Style Switchback Throttle Cable Issue https://www.hdforums.com/forum/dyna-glide-models/1494076-club-style-switchback-throttle-cable-issue-new-post.html Mon, 18 May 2026 16:19:46 GMT Hey guys, definitely a Harley noob here. Well, motorcycle noob in general. Bought a 2012 Switchback last summer as my first bike after taking the MSF course and getting my license. I just installed... Hey guys, definitely a Harley noob here. Well, motorcycle noob in general. Bought a 2012 Switchback last summer as my first bike after taking the MSF course and getting my license. I just installed Thrashin 6.5" pullback risers and high bend bars and the throttle cables are getting kinked when the bars are turned all the way to the right. They get kinked into a 90 degree angle in between the trees right where the cables straighten out and run along the frame. The throttle won't easily release when turned to the left and that's not something I want to encounter while riding. I was worried that they would be too short when turning all the way to the left but there's plenty of slack still. I can't figure out if I need to route the cables differently or if I need different length cables. When it was stock they clipped onto the nacelle that secures the headlight but I've removed that completely and put a Road Warrior fairing on it. Should I get longer cables and route them in front of the top tree and then back in between the top and bottom trees? Or are the stock cables too long, causing that 90 degree bend? I think the total rise of my new bar/riser setup is only like 2" higher than the stock setup, it mostly pushes the controls forward more since the bars aren't angled back.




]]> Dyna Glide Models loganflynn294 https://www.hdforums.com/forum/dyna-glide-models/1494076-club-style-switchback-throttle-cable-issue.html TC88 Cam Chain Guide https://www.hdforums.com/forum/dyna-glide-models/1493972-tc88-cam-chain-guide-new-post.html Fri, 15 May 2026 21:12:48 GMT Is it supposed to be this loose? I don’t remember when I disassembled Is it supposed to be this loose? I don’t remember when I disassembled
Attached Files
File Type: mov
IMG_0144.mov (5.73 MB)
]]> Dyna Glide Models zfigoli https://www.hdforums.com/forum/dyna-glide-models/1493972-tc88-cam-chain-guide.html 1st Harley recommendation https://www.hdforums.com/forum/dyna-glide-models/1493927-1st-harley-recommendation-new-post.html Thu, 14 May 2026 14:18:58 GMT Hi all! Looking for my first Harley, coming from a Japanese street/sport background... Am really liking the looks of the Dyna Soft tails without bags and fairing... Looking to ride country... Hi all!

Looking for my first Harley, coming from a Japanese street/sport background...

Am really liking the looks of the Dyna Soft tails without bags and fairing... Looking to ride country roads (canyon carving) and highways. Am 6' tall and 215 lbs.

I am looking at the used market and am slightly overwhelmed! I see a lot of Street Bob's, Fat Bob's, Wide glides and street glides in my area for sale. Trying to keep it around $10K for used and under $20K for new...

Any suggestions you can give me from your experience would be much appreciated.

Thanks! :icon_bike: ]]> Dyna Glide Models GioVanKnee https://www.hdforums.com/forum/dyna-glide-models/1493927-1st-harley-recommendation.html Speedo, Odo, horn, turn cancelers not working https://www.hdforums.com/forum/dyna-glide-models/1493887-speedo-odo-horn-turn-cancelers-not-working-new-post.html Wed, 13 May 2026 13:51:30 GMT On a trip last week on my 97 Dyna Wide Glide the items listed in the title quit orperating. i pulled the left side plate, (not a plastic pull off cover) and i see the 4 metal circuit breakers but i... On a trip last week on my 97 Dyna Wide Glide the items listed in the title quit orperating. i pulled the left side plate, (not a plastic pull off cover) and i see the 4 metal circuit breakers but i am not finding any plastic auto fuses. i pulled and cleaned off the VSS and followed the wires i dont see any pinched or shorted wires. I wanted to throw this one out before i give up and take it too a shop. Any thoughts on where the fuses might be or any other options as the malfunctioning items seem to be teamed up together on most posts ]]> Dyna Glide Models 97SpringerResto https://www.hdforums.com/forum/dyna-glide-models/1493887-speedo-odo-horn-turn-cancelers-not-working.html Cam and crank bolts https://www.hdforums.com/forum/dyna-glide-models/1493870-cam-and-crank-bolts-new-post.html Tue, 12 May 2026 20:26:06 GMT Hi, my service manual states to replace the crank and cam bolts, but does anyone reuse them? I cleaned the cam bolts with a thread chaser and it removed some of the coating. That ok? Image: Hi, my service manual states to replace the crank and cam bolts, but does anyone reuse them?

I cleaned the cam bolts with a thread chaser and it removed some of the coating. That ok?
]]> Dyna Glide Models zfigoli https://www.hdforums.com/forum/dyna-glide-models/1493870-cam-and-crank-bolts.html Gauges removed from 2017 FXDL https://www.hdforums.com/forum/dyna-glide-models/1493802-gauges-removed-from-2017-fxdl-new-post.html Mon, 11 May 2026 01:09:47 GMT I pulled the gauge panel off the top of the tank to do some work on the bike, and found these laying on the ground under the bike. Any idea where they would have come from? Image: I pulled the gauge panel off the top of the tank to do some work on the bike, and found these laying on the ground under the bike.
Any idea where they would have come from?



]]> Dyna Glide Models flyboyron https://www.hdforums.com/forum/dyna-glide-models/1493802-gauges-removed-from-2017-fxdl.html i flushed my front breaks today - streetbob 2014 https://www.hdforums.com/forum/dyna-glide-models/1493728-i-flushed-my-front-breaks-today-streetbob-2014-a-new-post.html Fri, 08 May 2026 22:50:00 GMT i flushed my front breaks today....i wanted to change brake calipers too but i did not have the correct bolt unscrew tool. so it is abs, and I think little air went in because i vaccumed it too... i flushed my front breaks today....i wanted to change brake calipers too but i did not have the correct bolt unscrew tool.
so it is abs, and I think little air went in because i vaccumed it too fast....but i used after that the whole bottle of harley brake fluid....but still did i do mistake...the break fludi has not been changed for 10 years or more..I never did it.
Now the front break level feels softer when i press brake...i need some expert advice, will ABS module cause problems? ]]> Dyna Glide Models falikmike https://www.hdforums.com/forum/dyna-glide-models/1493728-i-flushed-my-front-breaks-today-streetbob-2014-a.html Dyna Switchback Exhaust https://www.hdforums.com/forum/dyna-glide-models/1493715-dyna-switchback-exhaust-new-post.html Fri, 08 May 2026 18:12:04 GMT Hello, i recently bought a Dyna Switchback 2014, and im triying to find some exhaust 2 on 2 long shots or fish tails, but i cant find any options, do you have a compatibility options that i could... Hello, i recently bought a Dyna Switchback 2014, and im triying to find some exhaust 2 on 2 long shots or fish tails, but i cant find any options, do you have a compatibility options that i could try?, or any options? ]]> Dyna Glide Models CesarVH https://www.hdforums.com/forum/dyna-glide-models/1493715-dyna-switchback-exhaust.html i wanted to change front brake pads and i did not have the right screw https://www.hdforums.com/forum/dyna-glide-models/1493714-i-wanted-to-change-front-brake-pads-and-i-did-not-have-the-right-screw-new-post.html Fri, 08 May 2026 18:03:46 GMT i mean what is going on here....which screw i need to unscrew these 3 bolts? this is ridiculous Image: i mean what is going on here....which screw i need to unscrew these 3 bolts? this is ridiculous

]]> Dyna Glide Models falikmike https://www.hdforums.com/forum/dyna-glide-models/1493714-i-wanted-to-change-front-brake-pads-and-i-did-not-have-the-right-screw.html 04 fxdli gonna be a yard ornament if i cant get it runnning https://www.hdforums.com/forum/dyna-glide-models/1493702-04-fxdli-gonna-be-a-yard-ornament-if-i-cant-get-it-runnning-new-post.html Fri, 08 May 2026 11:59:48 GMT Hello anyone and everyone i sure could ise some help with my 04 fxdli,,, it started out , when i hit the button it would start and rev to 3k rpm and stay there, i only have a front brake so 3k is a... Hello anyone and everyone i sure could ise some help with my 04 fxdli,,, it started out , when i hit the button it would start and rev to 3k rpm and stay there, i only have a front brake so 3k is a little fast to be tryin to turn a corner or stop, but anyways i looked it up it said clean the throttle body the map sensor the aic and throttle position sensor, i checked codes awhile after, i cleaned them as best as i bould with carb cleaner and a teethbrush, then i developed a vaccum leak so i replaced everything from plugs and wires toinjectors. To tps,,, aic,,, map sensor, fuel filter the regulator i put 12$ a foot gasline in the tank and on the outside didn't replace the inside line from filter to pitcock. New gas 3 different times, intake gaskets ,because of the vaccum leak, it was the hole the aic goes 8n, i smashed out the oring 3 times i changed it finally got that part fixed, a smaller thinner oring that fit down in the tb it starts and idles now but at 8-900 rpm and dies, it nackfires and pops and blows flames out the throttlebody, im lost anybodys help os appreciated, it still wont run good enough to ride yet ]]> Dyna Glide Models Smoothy1966 https://www.hdforums.com/forum/dyna-glide-models/1493702-04-fxdli-gonna-be-a-yard-ornament-if-i-cant-get-it-runnning.html 2012 dyna glide wiring diagram https://www.hdforums.com/forum/dyna-glide-models/1493696-2012-dyna-glide-wiring-diagram-new-post.html Fri, 08 May 2026 05:08:01 GMT Can someone please post one for me please and thank you Can someone please post one for me please and thank you ]]> Dyna Glide Models habbat https://www.hdforums.com/forum/dyna-glide-models/1493696-2012-dyna-glide-wiring-diagram.html What cams are these? https://www.hdforums.com/forum/dyna-glide-models/1493691-what-cams-are-these-new-post.html Thu, 07 May 2026 22:21:11 GMT Stock TC 88, 2004. These cams look different than the other stock photos I’ve seen. There is a clear punch mark on each cam on the other photos I see, but these are etched 1 and 2. Are these stock? ... Stock TC 88, 2004. These cams look different than the other stock photos I’ve seen. There is a clear punch mark on each cam on the other photos I see, but these are etched 1 and 2. Are these stock?


]]> Dyna Glide Models zfigoli https://www.hdforums.com/forum/dyna-glide-models/1493691-what-cams-are-these.html Hesitant https://www.hdforums.com/forum/dyna-glide-models/1493663-hesitant-new-post.html Thu, 07 May 2026 04:22:20 GMT But it is necessary to know. So I’m going to ask anyway. Is there two different places to check and fill oil levels on my 2000 Dyna Super Glide Sport? Primary is or isn’t connected to motor oil... But it is necessary to know. So I’m going to ask anyway.
Is there two different places to check and fill oil levels on my 2000 Dyna Super Glide Sport?
Primary is or isn’t connected to motor oil supply? ]]> Dyna Glide Models Finallygotmeahog https://www.hdforums.com/forum/dyna-glide-models/1493663-hesitant.html