Power vision won't power up
#1
Power vision won't power up
I bought the power vision last year to help with the heat in a 2011 ultra. Ran the tune. Let it auto tune. Removed it and put it in my safe. Been hot as hell here so decided to run it again. Plug it in to bike...both on bike side and power vision side. Nothing. Doing something wrong? Tried for and hour. Remember it being awful easy last time. What next?
#2
Do you have the bike switched on?
Try plugging it into a USB port on your computer.... eliminate the bike as a possible problem..
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below...
Try plugging it into a USB port on your computer.... eliminate the bike as a possible problem..
__________________________________________________ ____
For ROCKOUT information & purchasing please click the LINKS below...
__________________
NO, they DON'T all do that!
ROCKOUT rocker shaft inserts... make the tapping STOP! From the guy that FOUND and CURED the problem NO ONE ELSE COULD, thank you for your support!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
Ordering & info http://www.rockout.biz On ebay! ... CLICK HERE
Also on amazon.com...
Imitated, never equaled... ROCKOUTS!
#3
#4
The following users liked this post:
Bumpandrun (07-19-2016)
#5
The following users liked this post:
Bumpandrun (07-19-2016)
#6
I bought the power vision last year to help with the heat in a 2011 ultra. Ran the tune. Let it auto tune. Removed it and put it in my safe. Been hot as hell here so decided to run it again. Plug it in to bike...both on bike side and power vision side. Nothing. Doing something wrong? Tried for and hour. Remember it being awful easy last time. What next?
__________________
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
Jamie Long / Fuel Moto USA
The USA's Leader V-Twin EFI & Performance www.fuelmotousa.com
Contact 920-423-3309
Email jamie@fuelmotousa.com
The following users liked this post:
Bumpandrun (07-19-2016)
#7
Make sure the PV is plugged into the correct connector which is the dataport under the left side cover (not the accessory plug), if it does not power up for some reason please contact us and we are more than happy to assist you. Also note that your PV unit is covered under warranty.
I'll get in touch Thanks a bunch
Trending Topics
#8
#9
#10