Heated Gloves
#1
#2
#3
Some of the leads from the battery use an SAE (flat 2 pin) connector and most of the newer heated gar uses a coax (round ) connector. IF that is your problem then you MIGHT need a adapter like this:
http://www.warmnsafe.com/sae-coax-jack-adapter-6-in/
http://www.warmnsafe.com/sae-coax-jack-adapter-6-in/
#4
HD sells the battery harness by itself for $15. I needed one too when I left my last one on the bike I sold.
I just ordered one of those, thanks! I would much rather use that than add more stuff to my battery.
Some of the leads from the battery use an SAE (flat 2 pin) connector and most of the newer heated gar uses a coax (round ) connector. IF that is your problem then you MIGHT need a adapter like this:
http://www.warmnsafe.com/sae-coax-jack-adapter-6-in/
http://www.warmnsafe.com/sae-coax-jack-adapter-6-in/
Last edited by ChickinOnaChain; 11-27-2016 at 09:57 AM.
#5
#6
#7
Trending Topics
#8
Thread
Thread Starter
Forum
Replies
Last Post