Found this today
#21
#23
Join Date: Nov 2010
Location: Directly above the center of the Earth
Posts: 2,945
Received 957 Likes
on
457 Posts
Make sure to check the wheel bearings!! That long sitting and the grease not moving often makes it dry out and stop lubricating. I know this because the '98 I bought with only 28k miles on it did this to me and the rear wheel bearings got so hot they welded to the axel and I had to cut off each end with a sawzall to be able to get it and the wheel off the bike to replace everything.
Not sure what kind of wheel bearings that year uses - the 'sealed' bearings or the cone bearings like on my '98. Either way, check them and replace them!
Not sure what kind of wheel bearings that year uses - the 'sealed' bearings or the cone bearings like on my '98. Either way, check them and replace them!
#25
The following users liked this post:
tar_snake (09-18-2018)
#26
Nice bike.... good deal ..... do a complete nut & bolt check, using a Torque wrench. All the fluids. I would do the tires but I am **** that way. True the wheels. .... Probably the brake pads also. ...... whatever you do, you know it’s done because YOU did it.
A nice city/back road bike..... Add Some leather saddle bags and you have a cross country touring ride
A nice city/back road bike..... Add Some leather saddle bags and you have a cross country touring ride
#27
It’s cleaning up nicely, found a couple of spots in the chrome pieces but easily replaced. Definitely replacing the tires.
it actually came with leather saddle bags, they are not on the bike, I am using some conditioner on them before adding them.
had a neighbor bring a friend by today, he seems interested in buying it, he asked if he could hear it run, I let him start it, damn thing barely made a revolution before firing and going straight to and idle, you could see it in his face.
for now, I’m gonna keep it.
it actually came with leather saddle bags, they are not on the bike, I am using some conditioner on them before adding them.
had a neighbor bring a friend by today, he seems interested in buying it, he asked if he could hear it run, I let him start it, damn thing barely made a revolution before firing and going straight to and idle, you could see it in his face.
for now, I’m gonna keep it.
The following users liked this post:
CanadianRocky (09-18-2018)
#29
Join Date: Aug 2014
Location: 40.2444° N, 75.6419° W
Posts: 34,849
Received 17,574 Likes
on
9,799 Posts
Thread
Thread Starter
Forum
Replies
Last Post