Where can I find the Harley's installation instructions for Harley's Audio Speaker Expansion Kit, part #76000263. I think the instruction number is J05539 or JO5539. I do remember read a post on this forum a while back which provide a website where you can pull up these installation instructions. I tried the Harley Davidson's website and it show no match for part number, 76000263.

 

https://serviceinfo.harley-davidson....inContent=true

 

Thanks!!!

 

I have the kit # 76000263 installed in my 2011 FLTRUSE. The kit was installed by the dealer that sold me the kit. My understanding is that the amp in this kit works in conjunction with the amp that is mounted under the Tour Pak.... Is that correct?
I noticed after the installation when cutting a hole and fitting the CVO saddlebag liner, along with positioning the amplifier bracket and putting the felt cover, (I think the install frustrated the service tech).....
The amp that comes in the kit, after installed has a set of wires (double stranded - assume they are + and -), that are coiled up and not connected to anything.
Does anybody know what those wires are for? The seem to be a fairly heavy gauge in comparison to all of the other wires....
Also, anybody have any thoughts on the Boom! speaker upgrades? Specifically P/N's 77037-10 & 77028-10?
Lastly, in that grade of speaker - what would be the P/N for the speaker to go in the HD lower fairing speaker kit that I had installed with this Amp?
Any help would be appreciated....

 

do you finish this combo ?
you adder 2 lowerfaring or 2 saddlebags ?
my bike is utral road glide cvo same your bike

 

if you install 2 saddlebags , not instal lower fairing
you will be spare RH power loc + and RH rear pod -
this is install for front lower fairing