Looking for a PCIII Map
I have a TC88 with se204 cams and, I guess, a Stage I intake. Not sure what the difference is between Stage I and II intakes. My intake was installed by previous owner and looks like a K&N type filter that must be oiled. It is completely exposed, except front cover which does not cover filter material at all.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated. |
Originally Posted by txphatboy
(Post 9297408)
I have a TC88 with se204 cams and, I guess, a Stage I intake. Not sure what the difference is between Stage I and II intakes. My intake was installed by previous owner and looks like a K&N type filter that must be oiled. It is completely exposed, except front cover which does not cover filter material at all.
I am about to install a V&H 2-1 Big Radius exhaust and am wondering if anyone has a map for this setup? Bike is 2001 fuel injected and currently has V&H BSS. At the time I did cams there were not any Power Commander maps for the 204 and we used a map for 203 cams instead. I am going to do a big bore kit in the next month or so, so I do not want to spend $$$ getting it tuned now, but would like a map that is pretty close until then. Any help is appreciated. |
Try this map it is on the Power Commander site, 805-225 I have the same setup as you do.
|
All times are GMT -5. The time now is 01:26 AM. |
© 2024 MH Sub I, LLC dba Internet Brands