Ape Hangers on a Fatboy
Alright i havent gotten my bike yet.The HD Dealer i bought it fromhas to ship it from Wisconsin, so I wont have it for a few more weeks. But i sat on another Fatboy at a nearby dealer and im not liking the stock handle bars. Im 6'2 and my arms are too low. Im not sure if i want 13" or 16" hangers on my bike, still deciding. My wife gave me the go ahead to order the parts to do it though. I was wondering if all my stock stuff (grips, brank/clutch handles, switches) will fit on 1.25" Bars? I know i need to extend the wiring and cables/lines but with all that fit on 1.25" bars? Also anyone know where i can get the extended stuff for a good price and what part numbers to ask for? Last question is..Where can i find a detailed write up on this type of install? Im new to motorcycles but im mechanically inclined and dont want to spend $1200 at HD to get em installed. Thanks for all the help, ill be sure to do my own write up with pics.
Jameson |
RE: Ape Hangers on a Fatboy
FWIW,i'm 6'2" and put 12.5 wild1 chubbys on my fatty.As far as i'm concerned they are perfect.One of the best mods i have done to my bike.
|
RE: Ape Hangers on a Fatboy
I'm 6'3" and have 18"s on my scoot - really comfortable and arms are at the puuuuurfect height:D
|
cable lengths for clutch,brake and throttle for 16" bars on a 95 softail? Anybody know
|
Originally Posted by kdoghouse454
(Post 7926152)
cable lengths for clutch,brake and throttle for 16" bars on a 95 softail? Anybody know
|
1 Attachment(s)
5'11" i have 16's on my fattie and they are perfect.
|
Originally Posted by babalu
(Post 7926259)
from experience just mock the bars up and measure exactly what you need.
http://i53.tinypic.com/55oxfl.jpg http://i53.tinypic.com/x2thdv.jpg |
Originally Posted by Jameson
(Post 1285478)
I was wondering if all my stock stuff (grips, brank/clutch handles, switches) will fit on 1.25" Bars?
Originally Posted by Jameson
(Post 1285478)
I know i need to extend the wiring and cables/lines but with all that fit on 1.25" bars?
Originally Posted by Jameson
(Post 1285478)
Also anyone know where i can get the extended stuff for a good price and what part numbers to ask for?
Originally Posted by Jameson
(Post 1285478)
Last question is..Where can i find a detailed write up on this type of install?
I'm 5'9", and went with the Wild 1's Chubby 12.5" apes. My arms are even with my shoulders. Could have just as easily gone with the 16's and been just as comfortable. Sit on the bike when you get it home, grab a broomstick, and have the wife measure up from the risers to the height's your considering and see how it feels. |
Originally Posted by babalu
(Post 7926259)
from experience just mock the bars up and measure exactly what you need.
http://img15.imageshack.us/img15/1774/pvcbar3.jpg piece of 3/4 pvc pipe and a couple of 90º elbows are all you need. I went with the 16" apes from Hill Country Customs. They have the cables already measured out for you, just let em know how tall your risers are. http://img716.imageshack.us/img716/835/afterl.jpg |
At 6'2" you really should seriously consider 16" or higher. I know a 5'4" girl with 18" apes on her Fatboy and she loves them. I'm 5'11" and I think 16" would be fine for me.
|
All times are GMT -5. The time now is 07:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands