Recently purchased a 2007 Sportster to mount a Inder (formally Cozy) side car to it. I am looking for help from anyone who has done this. I have the universal mounting kit, but I am not sure where to mount the rear two brackets. It looks like I do not have room. Any help is greatly appreciated.

Thank you!

 

I think you would get more help here: https://www.hdforums.com/forum/hacke...railering-100/

 

By coincidence I just came across this photo, while you're figuring this out:



Inder still exists, so perhaps they can help? Here is their website. They look as if they are an Indian company, so there must be a US importer, who should also be able to help with instructions.

 

I suggest you talk to DMC sidecars, they are in the Northwest but they have a lot of different mounting hardware and can probably help you out. Most Sportster sidecar rigs use a subframe to get you the secure mounting points you need. Also there are a few Sportster sidecar rigs you may want to look at on the advrider.com forum and also the sidecar.com forum. Good luck.

 

Finally mounted the Inder Sidecar to the 2007 Sportster. I was able to use one of the universal mounts and the rest had to be made. Next I have paint it all OD Green an mount the ZB30 Machine Gun! Thank you for your replies!

 

Well done, that looks just great!

 

Hello I'm about to mount one of these style sidecar on a 1999 model 1200 XL. Who is a good person for advice that's done a solid mounted evo Sportster?

 

Looks great, good that you stuck with it.

 

Looks good!