Frankenstein conversion is complete - Page 8 - Harley Davidson Forums


Hacked, Conversions and Trailering "Harley Sidecar, Conversion Trikes and Motorcycle Pull Behind Trailering Enthusiasts" A forum for the discussion of your sidecar, Conversion Trike or Pull Behind Motorcycle Trailer.

Frankenstein conversion is complete

Reply
 
 
 
Thread Tools Search this Thread
  #71  
Old 04-16-2018, 04:12 PM
gerald martin gerald martin is offline
New Member
Join Date: Nov 2015
Location: vernon bc canada
Posts: 97
Thanked 13 Times in 11 Posts
Default to ncbandit

bandit
Gerald Martin here. We have communicated before. Just to let you know I finally found the sporty I have been looking for. Its a 2005 883 low. I am going to put a hammerhead big bore kit on it and turn it into a Frankenstein Trike. I think I am going to like it more than the freewheeler I have now. I am going to do the motor this summer and will trike it, paint it and do all the rest next winter. I am very exited about doing this and am sure it will turn out well
Ride safe this summer.
Reply With Quote
  #72  
Old 04-17-2018, 12:52 PM
NCBANDIT's Avatar
NCBANDIT NCBANDIT is offline
One Of The Regulars
Thread Starter
Join Date: Oct 2016
Location: North Carolina
Posts: 235
Thanked 40 Times in 37 Posts
Default

Hey Gerald,

Great to hear from you. That project sounds like a lot of fun and I would love to start a project like that. Do you have a look you are after. There are a lot of cool pics on the Web of triked out sportsters, some with ape hangers, springer seats, and giant wheels. Can't wait to see yours when done.
Reply With Quote
  #73  
Old 04-17-2018, 06:01 PM
gerald martin gerald martin is offline
New Member
Join Date: Nov 2015
Location: vernon bc canada
Posts: 97
Thanked 13 Times in 11 Posts
Default frankenstein sporty

Quote:
Originally Posted by NCBANDIT View Post
Hey Gerald,

Great to hear from you. That project sounds like a lot of fun and I would love to start a project like that. Do you have a look you are after. There are a lot of cool pics on the Web of triked out sportsters, some with ape hangers, springer seats, and giant wheels. Can't wait to see yours when done.
It will have the Frankenstein sporty conversion kit, the wheels, fork sliders, brake calipers, triple trees, 14 inch apes, sissy bar, carrier, gear cover and primary cover will be powder coated shiny black. The paint will be bright red with gold flakes. Also a gold stripe will go down the center of the tank and fenders. The side covers will be also red with gold flakes. On one side cover I will pin stripe in my nickname DOC in a darker red so it will be visible but have to be looked at the right way to see it. There will also be a lot of stuff from DK Customs, like speedo relocation, coil and ignition relocation just to name a few. Also the motor will have the 1275 basic big bore kit by Hammer head in Sand Point Idaho. It is going to be a fun project. I will not be starting the trike conversion till the fall but the rest will be done slowly this summer. I have to learn how to post pictures of my progress

Last edited by gerald martin; 04-17-2018 at 06:03 PM.
Reply With Quote
  #74  
Old 04-18-2018, 05:25 PM
NCBANDIT's Avatar
NCBANDIT NCBANDIT is offline
One Of The Regulars
Thread Starter
Join Date: Oct 2016
Location: North Carolina
Posts: 235
Thanked 40 Times in 37 Posts
Default

Quote:
Originally Posted by gerald martin View Post
It will have the Frankenstein sporty conversion kit, the wheels, fork sliders, brake calipers, triple trees, 14 inch apes, sissy bar, carrier, gear cover and primary cover will be powder coated shiny black. The paint will be bright red with gold flakes. Also a gold stripe will go down the center of the tank and fenders. The side covers will be also red with gold flakes. On one side cover I will pin stripe in my nickname DOC in a darker red so it will be visible but have to be looked at the right way to see it. There will also be a lot of stuff from DK Customs, like speedo relocation, coil and ignition relocation just to name a few. Also the motor will have the 1275 basic big bore kit by Hammer head in Sand Point Idaho. It is going to be a fun project. I will not be starting the trike conversion till the fall but the rest will be done slowly this summer. I have to learn how to post pictures of my progress


Wow!! that is going to be one awesome ride. Yes, please figure out how to post pictures because we definitely want to see this build.
Reply With Quote
  #75  
Old Yesterday, 12:38 PM
motohaid's Avatar
motohaid motohaid is offline
Road Captain
Join Date: Jan 2009
Location: Charlotte, NC/Greenville, SC
Posts: 661
Thanked 74 Times in 52 Posts
Default

Those are some cool looking trikes. They just remind me a little to much of the early atv's which were three wheel atc's. Busted my butt more than once in the woods cornering hard and have to brake harder than I knew I should.


Reply With Quote
  #76  
Old Yesterday, 12:59 PM
mcgee10's Avatar
mcgee10 mcgee10 is offline
One Of The Regulars
Join Date: Feb 2017
Location: Grand Rapids, MI
Posts: 222
Thanked 25 Times in 18 Posts
Default

I hope your joking our trikes are Nothing like that toy.
Reply With Quote
  #77  
Old Yesterday, 03:49 PM
NCBANDIT's Avatar
NCBANDIT NCBANDIT is offline
One Of The Regulars
Thread Starter
Join Date: Oct 2016
Location: North Carolina
Posts: 235
Thanked 40 Times in 37 Posts
Default

Quote:
Originally Posted by motohaid View Post
Those are some cool looking trikes. They just remind me a little to much of the early atv's which were three wheel atc's. Busted my butt more than once in the woods cornering hard and have to brake harder than I knew I should.


I can see where you would think that since those 3 wheelers would flip in a heart beat. These are unbelievably stable. Mine is wide enough with a low center of gravity so you can't raise a wheel if you tried. If I take a corner too fast the front wheel will skip a little. I will fly off the trike due to centrifugal force before a wheel will come up. I have heard of tri-glides raising a wheel though, since the center of gravity is much higher and it has narrow rear wheels.

If you ride one you will know what I mean. Addicting fun.
Reply With Quote
  #78  
Old Yesterday, 05:31 PM
gerald martin gerald martin is offline
New Member
Join Date: Nov 2015
Location: vernon bc canada
Posts: 97
Thanked 13 Times in 11 Posts
Default conversion

Quote:
Originally Posted by NCBANDIT View Post
I can see where you would think that since those 3 wheelers would flip in a heart beat. These are unbelievably stable. Mine is wide enough with a low center of gravity so you can't raise a wheel if you tried. If I take a corner too fast the front wheel will skip a little. I will fly off the trike due to centrifugal force before a wheel will come up. I have heard of tri-glides raising a wheel though, since the center of gravity is much higher and it has narrow rear wheels.

If you ride one you will know what I mean. Addicting fun.

Your trike I believe is the 38 inch wide axle. The one I am building will have a 34 inch wide axle. Although mine will be a little bit narrower than yours I have never heard of a sportster trike lifting a wheel or tipping over. My freewheeler has a higher center of gravity but still I think the only way you could tip it is by sliding into a curb going around a very sharp corner at a vey high rate of speed. I have actually slid the rear end on dry pavement going around a corner too fast. Scared the s*** out of me but still didn't lift or tip
Reply With Quote
The Following User Says Thank You to gerald martin For This Useful Post:
NCBANDIT (Yesterday)
  #79  
Old Yesterday, 07:56 PM
motohaid's Avatar
motohaid motohaid is offline
Road Captain
Join Date: Jan 2009
Location: Charlotte, NC/Greenville, SC
Posts: 661
Thanked 74 Times in 52 Posts
Default

Quote:
Originally Posted by NCBANDIT View Post
I can see where you would think that since those 3 wheelers would flip in a heart beat. These are unbelievably stable. Mine is wide enough with a low center of gravity so you can't raise a wheel if you tried. If I take a corner too fast the front wheel will skip a little. I will fly off the trike due to centrifugal force before a wheel will come up. I have heard of tri-glides raising a wheel though, since the center of gravity is much higher and it has narrow rear wheels.

If you ride one you will know what I mean. Addicting fun.
They look way cool and probably wouldn't take long to get used to riding it. I bet you get more respect from cage drivers than a two wheeler. I wonder when someone is going to come up with a kit to put two wheels on the front. That would be a badass atv.

Hey Bandit don't get your panties in a wad. I think they are really cool and I didn't mean to sound like I was talking down on em cuz I wuzant. I am glad to hear they are really stable but the three wheel ATC's weren't toys. They were just built for a different purpose. And evolved into the ATV's we have today.

Last edited by motohaid; Yesterday at 08:06 PM.
Reply With Quote
  #80  
Old Yesterday, 10:17 PM
NCBANDIT's Avatar
NCBANDIT NCBANDIT is offline
One Of The Regulars
Thread Starter
Join Date: Oct 2016
Location: North Carolina
Posts: 235
Thanked 40 Times in 37 Posts
Default

Quote:
Originally Posted by motohaid View Post
They look way cool and probably wouldn't take long to get used to riding it. I bet you get more respect from cage drivers than a two wheeler. I wonder when someone is going to come up with a kit to put two wheels on the front. That would be a badass atv.

Hey Bandit don't get your panties in a wad. I think they are really cool and I didn't mean to sound like I was talking down on em cuz I wuzant. I am glad to hear they are really stable but the three wheel ATC's weren't toys. They were just built for a different purpose. And evolved into the ATV's we have today.
LOL!! No waded panties here. I didn't take it that way at all. I was just trying to be informative. I believe the previous post to mine mentioned toys.
Reply With Quote
 
 
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Frankenstein conversion gerald martin Hacked, Conversions and Trailering 8 02-12-2018 05:58 AM
frankenstein trike conversions gerald martin Hacked, Conversions and Trailering 6 01-05-2018 08:05 PM
Frankenspringer or? street bob 59 Hacked, Conversions and Trailering 9 08-30-2017 12:20 AM
XG750 trike? smitty901 Harley-Davidson Street 0 08-20-2017 04:01 PM
WTB 2014+ dresser fuel/oil gauge frankenstein71 Want To Buy Motorcycles/Parts/Accessories 1 04-24-2017 09:35 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off

Forum Jump

Featured Sponsors
Vendor Directory

All times are GMT -5. The time now is 11:58 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.
 
  • Ask a Question
    Get answers from community experts
Question Title:
Description:
Your question will be posted in: