Setting up my 2002 FLHTCUI for a trailer. I usually use a powered converter that is not vehicle specific.

Wondering if there is anything else I should consider.

 

I use a Bushtec plug and play relay based isolator. Works well and I've been happy with it.
I believe the company Electrical Connections manufactures the isolator for Bushtec.

 

Yep ... Bushtec here also ... Easy peasy

 

I've got a 15' FLHTC, just installed a Khrome Werks hitch with mating Plug-n-Play wiring kit.... flat 4 pin harness, install was easy, then wired my newly purchase (used) trailer to match omitting a few lights that were not needed. All works great & can't wait to try it out this year!

 

Electrical connection 3300 rifle range drive Knoxville Tennessee these guys are the best I have set up several bikes and trailers their customer service and warranty is excellent I highly recommend them American made not Chinese bullshit

 

 

Thanks for the replies. I have a wiring connector for previous purchases, so I made my own plugin. Bought a Hopkins powered converter for the lighting. Found out that truck use 4/5/6 pin metal connectors between tractor and trailers. So I only had to fabricate the plug mount. All for under $40.

 

can you tell me how the Bushtec wiring was run? I have to wing it since I have no instructions.
Thanks.

 

What are you specifically looking for? The Bushtec owners manual has some information in regards to the wiring color codes.

https://bushtec.com/pages/technical-support